Materials Engineering and Automatic Control

Preface and Committees
Chapter 1: Organization, Defects and Performance of Material
The Preparation and Performance Characteristics of Polyvinyl Chloride-co-Vinyl Acetate (VC-Co-VAc-OH) Modified Membranes on the Non-Woven Fabrics
The Influences of Annealing Temperature on the Crystal Phase and Microstructure of the WO3 Thin Film
Adjust the Content of Nickel in NiZnO Films by Vacuum Anneal
Undercooled Solidification of Ni-3.3wt.%B Alloy
Effect of Supercritical Carbon Dioxide on the Mechanical Properties and the Morphology of PPO/POE Blends
Γ-Radiation Effect Research of PP/TMPTA/TPU Blends
The Effect of SiC Content on Pressureless Sintered Si2ON2-SiC Ceramic
The Oxide Inclusion and Heat-Affected-Zone Toughness for Low Carbon Bridge Steels
Study on Tribological Properties of ZrO2 Ceramic Coating with APS
Microstructure and Mechanical Properties in QT-Treated 9Ni Steel
Effect of Inhomogeneous Structure of Polybenzoxazine on Mechanical and Thermal Properties
The Properties of Modified Adobe Materials with Desulfurization Waste
Investigating Time Dependent Mechanical Properties of Epoxy with Nano Particles by Using Indentation Tests
Preparation of Super Hydrophobic Surfaces by the Stainless Steel Wire Mesh as Templates
Performance of De-Energized Polymeric Insulating Material under Various Environment Stresses
An Electrochromic Copolymer Based on Pyrrole and 3,4-Ethylenedioxythiophene Electrodeposited in Aqueous Micellar Solution
Oxidation of U71Mn Steel under Pure Oxygen
Influence of Substituting La with Zr on Electrochemical Characteristics of As-Spun RE–Mg–Ni-Based A2B7-Type Alloys
Corrosion of Biodegradable Implant Mg-2Ca-xZn Alloy in Simulated Body Fluid with the Addition of Zn
Effect of the ZnO Buffer Layer Thickness on AZO Film Properties
Kinetic Study for Ion Exchange of Taurine on D290 Anion Exchange Resin
Long Term Reliability and Power Degradation Analysis of Multicrystalline Silicon Solar Modules Using Electroluminescence Technique
Gold Nanoparticle Aggregates Preparation by (3-aminpopropyl)- Trimethoxysilane for Highly Active SERS Substrates
Study on the Conductive Filament Formation of HfO2
Elastic Modulus of Tetrakaidecahedron Closed-Cell Cellular Materials
Study on Forming Mechanism of Lamination Defect of AH36 Shipbuilding Plate Steel
Research on the Photometry and Corrosion Characteristics of Rare Earth Iodides in Ceramic Metal Halide Lamps
Experimental Study on Wear Test of Grind-Hardened Layer
A Cutting Line Positioning and Defects Detection System for Polyurethane Plate Based on Computer Vision
Developing Coarse-Grained Force Fields of Poly (methylmethacrylate-b-2-vinylpyridine) from Atomistic Simulation
The Effect of Current Density on Zinc Whisker Growth
Influence of VC Precipitation on the Shape-Memory Effect and Corrosion Resistance on an Fe–Mn–Si–Cr–Ni Alloy
Real-Time Infrared Image Analysis for Deformation Heat of Precast Defected PVC Sheet Based on MATLAB
Influence of Low Temperature Annealing on Structure and Photoelectric Properties of MgZnO Thin Films
A Novel Lost Circulation Material: Fuzzy Ball Working Fluids
E-pH Diagram of Fe-N-H2O System and its Application in Nitrite
Microstructure Change of Bionic Units on Vermicular Cast Iron Processed by Laser in Thermal Fatigue Tests
Chapter 2: Testing and Analysis Techniques of Material
Ag/TiO2 Nano-Membrane Formed on the Surface of Domestic Ceramic for the Enhancement of Photocatalytic Property
Kinetics Analysis of Direct Nitridation of Silicon Powders at Atmospheric Pressure
Failure Behavior Tests of Preloaded T300/AG80 Composites Irradiated by Laser Beam
Influence of Deposition Time on ZnO Films Grown by RF Magnetron Sputtering
The Fretting Wear Property of Grease Containing Antiwear Nanoparticles Additives
Corrosion Inhibition of Vitamins B for Hot Dipped Zn Coating Steel in Hydrochloric Acid
A Comparative Study of Soldering Temperatures and Materials on the Reliability of Photovoltaic Modules
Effect of Aluminum Honeycomb Cell Geometrical Parameters on Efficiency of Material
Effects of Cryogenic Treatment on Micro-Mechanical Properties of a Cu-Al Alloy
Transformation Kinetics of α+γ2 to ß in Cu-Al Alloy after Cryogenic Treatment
Microstructure and Properties of Boronized Layer Produced by Borosulphurizing Method
Material Texture Contourlet Retrieval by Energy and Variance Distribution Features
Preparation of Medium-Sized Tungsten Particles via the New Method

In Situ Observations of Lateral Growth Rate of δ- Phase during Solidification of Fe-0.2%C-0.6%Mn Steel
Waveband Selection with Stability for FTIR/ATR Spectroscopic Analysis of COD in Sugar Refinery Wastewater
Chapter 3: Metallic Materials
Effect of Retrogression Time on the Mechanical Properties and Stress Corrosion Cracking Behavior of 7A60 Aluminum Alloy
Comparison of Thinning Features of a Hot and Cold Stamped Aluminium B-Pillar Model for Passenger Cars
Grain Refinement of Zn-50Al Alloy through the Addition of Zn–Al-Ti-B-C Master Alloy and Melt Thermal-Rate Treatment
Effects of Hot Extrusion and Heat Treatment on Mechanical Properties and Microstructures of AZ91 Magnesium Alloy
Ni-TiN Composite Coatings Prepared by Ultrasonic-Magnetic-Electrodeposition
Research on the Lipophilic Degree of Surface Modified ZnO Nanocrystals with Different Morphologies
Study of the Synthesis and Photocatalytic Properties of Iron-Doped Titania Nanocrystallines at Room Temperature
Effect of Transition Metal Ion Doping on the Photocatalytic Activities of TiO2 Synthesized by Sol-Gel Method
CO2 Erosion of the Ni-TiN Nanocoatings Prepared by Electrodeposition
A Study on Ni–TiN Coatings Produced by Ultrasonic Pluse Electrodeposition
Study on Power Generation Experiment Using the Ferriferous Oxide Magnetic Fluid
Assembly of Well-Aligned Electrospun Nanofibers via Contact-Transfer Printing
Effect of Intermetallics on the Low Cyclic Fatigue Crack Growth Behavior of a Heavily Alloyed Al-Si Piston Alloy
Research on Key Technologies of Mesoscopic FEA Model for Polycrystalline Metal Power Spinning
Study on Correlate Qualitatively the Deposition Conditions with the Morphology of the Nanocomposite Films
Influences of Process Parameters on Forming Performance of Sheet Metal Incremental Forming Based on Numerical Simulation
Electron Properties of F, and N Doped Hematite: The Application for Photocatalysis
Research on Prediction Method of Alloy Element Yield in Smelting Stage of Iron and Steel Product Based on Improved Support Vector Regression
Synthesis, Structural and Gas Sensing Properties of Nano-Branched Coaxial Polyaniline Fibers by Electrospinning
Mechanisms of Grains Refining in Adiabatic Shear Band of Titanium Alloy
Friction and Wear Behavior of 9SiCr Steel under Different Treatment with Plant Abrasive
Grain Refinement of Zn-25Al Alloy through the Addition of Zn-6Ti Master Alloy
Experimental on the Residual Life of Oil Tubing of J55 Material
Electrodeposition of Composite Coatings Containing AlN Particles in Nickel Deposit
The Computation of Elastic Constants of Double Wall Carbon Nanotubes Based on the Finite Element Method Considering Van Der Waals' Force
Axial Buckling Behavior of Double-Wall Carbon Nanotubes by Finite Element Simulation
Chapter 4: Inorganic Non-Metallic Materials
Effect of Annealing on the Magnetostatic and Microwave Electromagnetic Properties of Glass-Coated Fe-Rich Microwires
Friction and Wear Performances of Magnesium Alloy against Steel under Lubrication of Rapeseed Oil with N-Containing Additive
Effects of Sizing Removal by Air Heat-Treatment on Degradation of Silica Fibers
Numerical Simulation for Temperature of Ceramic Honeycomb Regenerator
Investigation on the Properties of Supercritical CO2 Fluid and its Heat Transfer Characteristics
Status of the Development and Application of Oil Sand
Development and Application of Functionally Graded Material
Influence of Calcined Temperature and Sintered Technology on the Properties of NBT-KBT-BT Lead-Free Piezoelectric Ceramics
Influence of Composite Antioxidants to Asphalt Anti-Aging Performance
Preparation of Rigid Polyurethane Foam and Research Progress of its Reinforced Technology by Inorganic Materials
Chapter 5: Composite Materials
Experimental Study on Damping Properties of Fiber Reinforced Composites with Resin Matrices
Composite Repair and Reinforcement Technology for Oil and Gas Pipeline and its Development Trend
Effects of Modified Graphite on Thermal Properties of Modified Graphite/CA-MA/PMMA Composite for Latent Heat Thermal Energy Storage
Fabrication of Supramolecular Structured Hydrogels Based on Diels-Alder Click Reaction
Baseline Method for Determining the Solid Fraction
Hybrid Hematite/Multi-Walled Carbon Nanotube (α-Fe2o3/MWCNT) Nanostructures as Sorbents for Cu(II)
Research Status of Natural Gas Hydrate in China
Gasification Characteristics of a Novel Domestic Straw Gasifier
Fabrication of Aluminum-Containing Silicon Carbide Fibers from Electrospinning
TEM Investigations on Three-Dimensional Silica Fiber Reinforced Silicon Nitride Composites
Influence of the Ratio of ZnO/SnO2 on the Photocatalytic Property of ZnO/SnO2 Nanometer Powder
A Novel Experimental Method and its Numerical Simulation for the Bi-Stable Anti-Symmetric Composite Shell
Effect of Screw Assembly on the Properties of Glass Fiber-Reinforced Nylon-66 Composite
Ultrasound Continuous Treatment on Interface of Carbon Fiber/Phenolic Resin Composites
The Design and Analysis of Polymer Cosmetic Micro-Needle
Three-Dimensional Braided Composites Detection Method Based on Improved Chaotic Neural Network
Chapter 6: Material Synthesis and Processing Technology
Synthesis of Aluminum Nitride Powder by Carbothermal Reduction
Synthesis of β-Sialon Ceramics Using Si, Al and Al2O3 Powders
Coaxial Electrospinning with N, N-Dimethylacetamide for Preparing Methacrylate-Based Copolymer Nanofibers
Hard Thermosetting Polyurethane Plastic Degradable Test and its Influential Factors
Effects of Growth Rates on Directionally Solidified Microstructure of Al-Ni-Y Ternary Alloy
Preparation of La1-xSrxMnO3 Materials by High Temperature Solid Phase Method
The Microstructures and Mechanical Properties of a Novel Biomaterial Mg-Zn-Sr Alloy Sheet during Aging Treatment
Synthesis of CuO Microspheres by the Simple Hydrothermal Method and their Optical Absorption Properties
The Influence of the Hydrothermal Conditions on the Morphologies of β-Ni(OH)2
Study of Iron Oxide in Hardener on Properties of Phosphate No-Bake Binder Foundry Sand or Core
Study of New Atomization Mechanism for Manufacturing Metal Powder
Syntheses and Evaluation of Copolymer 6-Aminohexanoic Acid and 4R-Hydroxy-L-Proline for Bone Repair
Synthesis and Characterization of Novel Polymer of Vinyl Carbazole Bearing Thiophene Groups
Chapter 7: Mechanics
Research on Measuring the Gear Surface of the Worm Pair
Milling Tool Wear Condition Monitoring Based on Extension Theory
Analysis on Torsional Vibration of Low-Speed Diesel
Experimental Study on Active Vibration Control of a Gear Pair System Based on FxLMS Algorithm
The Three-Dimensional Dynamics for Toroidal Drive
Simulation of Surface Contact Process and Study of Friction and Wear Mechanisms
A Special Solution of Spatial Straightness for Four Datapoints
Low Speed Diesel Engine Block Finite Element Analysis
Verification on Indirect Inverse Substructuring Method for Coupling Dynamic Stiffness Identification of a Mechanical Assembly
Error Effects on Identifying Coupling Dynamic Stiffness of a Mechanical Assembly by Indirect Inverse Substructuring Dynamic Analysis
Analysis of Thermal-Mechanical Coupling Strength and Fatigue Life of Piston of Low Speed Diesel Engine
Inverse Design of a New Double-Link Luffing Mechanism of Lemniscate Floating Crane
The Inverse Kinematics Analysis and Simulation of the Special Five Bar Cutting Mechanism for the Ellipse Section Shield
Study on the Organization and Mechanical Properties of Q345R Weld-Joint
System Design of Testing System for Truck-Mounted Solar Collector
Study on the Weldability and Metallurgical Structure of 15CrMoR
The Research on Variety of Instantaneous Transmission-Ratio of Gear Pump with Circular-Arc Tooth Profile
Effects of Metering Configuration of Injection Molding Screws on Pressure-Developing Capability
Special Combustion Chamber in the Cylinder of Diesel Engine Working Process Simulation Analysis Based on the FIRE Software
Evaluation of Injection Molding Screw Performance by Melt Viscosity Homogeneity
Design and Modeling of a New Inchworm Linear Motor
Modeling and Simulation of a Novel Drive Joint Based on Permanent Magnet and Electromagnet
The Study of Micro-Injection Molding of Thin-Wall Light Guide Plate with Hemispherical Micro Structures
Application and Research on FEA while Promoting Vertical Milling Machine
Research on the Wear Characteristics and Wear Mechanisms of CrAlTiN Coated HSS Tools under Dry Cutting Conditions
An Intelligent Tire Pressure Monitoring System Base on Wireless Radio Frequency Technique
Strength Analysis of Steering Knuckle Arm on Veyron Car
FE Analysis on Rolls Deformation in Rolling Process of 4100 Heavy Plate Mill
Leakage Analysis of a Synchronal Rotary Multiphase Pump
Study on Process Planning of Auto Body Welding Line Based on Digital Factory
A Method for Solving Stiffness of Finite Length Self-Acting Gas-Lubricated Journal Bearing
The Assessment of Cylinder Liner by HAZOP Analysis and Fuzzy Comprehensive Evaluation
General Formula of Mobility Calculation for Planar Mechanism
Orthogonal Experiment Design and Analysis on ABS Power in SLS
Analysis and Calculation of 3MW Wind-Turbine Main Shaft
Intervallic Coiflets for Numerical Calculation of Dynamic Stress Intensity Factor
GA-Based Optimal Design of Derricking Balance Mechanism of Bucket Wheel Stacker Reclaimer
Automatic Parametric 3D Modeling for Involute Cylindrical Gear
Structure Design and Finite Element Analysis of a New Type Metallic-Disc Flexible Coupling for Diesel Generator Set
Design and Implementation of Cutting Parameter Selection System in Standardization Data and Modular Approach
Research on Numerical Algorithm of Constitutive Equation under High Speed Deformation in Hadfield Steel
Analysis and Design of Low-Speed Bar Linkage
The Optimization Design on the Truss Girder of Portal Crane
The Dynamic Analysis on the Truss Girder of Portal Crane
Application of Topological Optimization on Aluminum Alloy Automobile Wheel Designing
Optimization Design of Hydraulic Cylinder Based on ANSYS
Isoscallop of Self-Adaptive Tool Orientation with Toroidal Cutter under Optimum Orientation of MCPs
Chapter 8: Mechanical Design
Influence of the Chemical Elements of Welding Materials on Mechanical Properties
Chapter 9: Mechanical Manufacturing Processes and Equipment
PLC-Based Automatic Plating Line Design
Key Technology Research of the Temperature Field Simulation Based on the Flat Butt Weld
Prediction of Weld Bead Geometry for Robotic GMAW Rapid Prototyping & Manufacturing
Research on Air Suspension Rotation Parts’ Dynamic Equilibrium Measurements
Research on Full-Digital Controlled AC Soft-Switching Inverter Welding Power Supply
Optimization and Supporting Technology of Compressor Cylinder Block Machining Process
Size and Defect Detection of Hami Big Jujubes Based on Computer Vision
CFD Optimization of Design for IGBT Air-Cooled Heat Sink
Visualized Flight Control and Flight Mechanics Calculation
X6132 Universal Milling Machine Computer Numerical Control Transformation
Frame Structure Bridge Design CAD Software Systems
Tapered Work Roll Shape Design and Optimization for Cold Tandem Rolling Mill
Study on the Numerical Control System for Frame Cold-Bending Machine
Design and Research of Shell-Breaking Machine for Hand-Stripping Hickory-Nut
Study on Arc Stability Mechanism in High-Speed Tandem GMA Welding
Research of Experiment Platform for Drilling Hydraulic Mining of Oil Shale
Research on a Generalized Simulation Algorithm for Cutting Forces Prediction of Helical Milling and its Implementation
Preparation and Electrochemical Properties of LiMn2O4 Nanofibers via Electrospinning for Lithium Ion Batteries
Research on Durability Test Method for Wheel Bearings
Research on Fixing Night Vision System to Engineering Vehicles
Gear Pitting Corrosion Fault Diagnosis Based on Local Mean Decomposition
Research on the Influence of Unsprung Mass on Vehicle Handling Stability
Reform of Entrance Sealing Device of Large Vertical Reduction Annealing Furnace
Experiment and Numerical Simulation of Frictional Resistance in Vertical Helically Coiled Pipe
Displacements Recognition and Tank Capacity Demarcation of Oil Tank
Neural Networks Based Intelligent Synthetic Method and its Applications in Equipment Evaluation
Research on a Vertical Settlement Type Dehydrator with Spiral Sieves
Modeling of Multiteeth Contact Meshing Gear Dynamics with Backlash and Coincidence Degree
Design and Simulation of New Energy-Saving Burner
Analysis on Schemes of Passive Heave Compensation System for Base Plate
A Novel 5-Axis Machining Method for Sculptured Surface
Computer Aided Programming for Boring Counterbore Holes
Efficency Evaluation for Aircraft under Reconfiguration Control Subtitle as Needed
Design and Realization of Digital Signature System
An Efficient Parallel Algorithm for Mining Frequent Pattern
The Research of Digital City Construction Based on Virtual Reality Technology
High-Level Structure of the Shear Parameter Identification and Damage Detection Based on Elman Neural Network
Prototype Stress Test Research on Cast-Steel Joint of Large Span Roof System
Analysis and Control of Chatter Marks of Strip Steel on HC Cold Rolling Mill
3-D Numerical Simulation on Unsteady Turbulent Flow of Rotational Flow Self-Priming Pump
A Study on Reliability Assessment for CNC Equipment
Reliability Assessment for CNC Equipment Based on Multi-Parameter Degradation Data
A Novel Dynamic Electromagnetic Heating-Magnetizing Device Used for Reverse Osmosis System
Machining Deformation Equation of FWP Based on Rayleigh-Leeds Method
Chapter 10: Mechanical Power Transmission and Control
Kinematics Model and Simulation of Precise Wheat-Sowing Robot
Research on Expert System for Electric Locomotives Fault Diagnosis
Research on Obstacle Performance of Micro Battlefield Robot
Multi-Robots Path Planning Based on Improved Artificial Potential Field Method
A Fast Algorithm for Multi-Robot SLAM
Simulation on Obstacle Avoidance Method for Multi-Robots in Movement Control Process
Study the Relationship of 3D Coating Morphology and Frictional Wear Based on Dual Surface Image
Soccer Robot Path Planning Based on Evolutionary Artificial Field
The Research and Practice of Fast Handoff Scheme Base on V2V
Research on Key Technologies of Signal Processing in Automobile Performance Virtual Detection System
Research on Nonlinear Control of AC Active Magnetic Bearings
A New Mathematical Model of Brake Test Stand Control System
Static Strength Test and Analysis of the Hot-Metal Car Frame
Structural Research of Pipe Automatic Handing System of Land Rig
Roll Eccentricity Phase Identification System
AutoLISP Drawing Using the Second Development of AutoCAD
Chapter 11: Mechanical Dynamics and Vibration
The Vibration Analysis and Improvements of Nitrogen Reciprocating Compressor and Pipeline
The Vibration Analysis and Improvements of Compressor and Pipeline for Reforming Hydrogen Device
Interval XFEM and its Application to Fracture Mechanics Problems
Predictive Control and Simulation for Variable-Pitch Wind Turbines
Design of Detecting System for Moving Target Based on Twice Mixing
Numerical Simulation of Stable Turbulence Generated by the Pipe Flow of Self-Regulating Air Driving Power Supply for Airflow Piezoelectric Generator
Experimental Study on Effect of Hot EGR on Combustion Characteristic of HICE under High Load Conditions
Dynamics Analysis and Simulation for Fluid-Structure Coupled Vibration of Liquid Container
Numerical Study of the Thermal Performance in Natural Draft Wet Cooling Tower with Different Fill Types
Research on the Heat Release Rate Characteristics of Diesel Engine Coolant System Based on GT-POWER
Modal Analysis of High-Speed Traction Motor Rotor Shaft
Starting Control Strategy and Experimental Study of CNG Engine
Study of Fuel Injection Quantity Fluctuation in High Pressure Common Rail System in Entire Operating Conditions
Design of Driving Circuit of Solenoid Valve for High Pressure Common Rail Diesel Engine Injector
The Performance Comparison and Benefit Analysis of Speed Control System of Mine Motor Vehicle
A Vehicle-Mounted Power Plant Based on Hybrid Electric Vehicle
An Experimental Investigation on the Effect of Clearance on the Dynamic Characteristics of the Frame Towers
A Modeling and Simulation Study on New Type Continuous Variable Damper with Solenoid Valve
Study on the Applicable Wind Speed Model of Wind Farm and High-Frequency Wind Simulation
Study for Three-Dimensional Design of the Engine Crankshaft Piston Group
Application of Heat Pump Technology in Coal Mine
Research Advances of NOx Emissions Control Technologies of Stoker Boilers
Application of Wavelet De-Noising in Fault Diagnosis of Wind Turbine Gearboxes
CFD Simulation Analysis of Pressure Drop in a Vertical Helical-Coil Heat Exchanger
Performance Analysis of a New Type of Wind Resistance Brake Mechanism Based on FLUENT and ANSYS
The Mini-Vehicle Manual Transmission Reverse-Gear Noise Analysis
Intelligent Driver Designing for Electro-Hydraulic Proportional Valve of Engineering Machine
A Probability Density Estimation for Fault Detection
A New Method for Tectonic Conserved Quantity on Invariant Manifold of Autonomous System
Fiber Reinforcement Effect of the Corn Stalk Skin
The Experiment on the Features of Ultrasonic Vibration Stimulating the Absorption and Desorption of Methane in Coal
Research of Aerodynamic Noise Prediction of High-Speed Train
Study of Driving Force and Synchronization on a Space Docking Lock System
Precision Modeling and Deformation Analytic Computation of Throttle Slice of Telescopic Shock Absorber
Differential Equation and Analytic Computation of Throttle Slice Deformation under Micro-Circle Pressure
Numerical Simulation and Performance Study of Adjustable Steam Ejector Using CFD
Dynamic Analysis and Multiparameters Optimization of Hydrostatic Supported Worktable System
Research on Performances of the Pressure-Exchange Ejector
Research on the Vibration Measurement Approach to the On-Line Noise Evaluation for Vehicle Transmissions
Direct Position Analysis of a Reconfigurable 4-DOF Parallel Mechanism
Numerical Calculation of the Pressure Distributions on a Rudder Surface
Influence of Slide Stroke Curves on Forming Quality of Box Shaped Part during Deep Drawing
Study on Characteristics of Flow-Induced Vibration in Pre-Opening Sleeve Valve
Suspension Optimization Based on Ride Comfort and Road-Friendly
Chapter 12: Measuring and Testing Instruments
Automatic Monitoring of Vacuum System on Transmission Electron Microscope by Event-Based Approach
Analysis for 2D Flow Field around H-Vertical Axis Wind Turbine with Different Types of Airfoil
The Fractional-Order Control Method of Dynamic Elastoplastic Responses of Benchmark Buildings
Methods Research and Analysis of Non-Contact Measurement to the Moisture Content of Textile Material
Method of Controlling the Inversion Quality of NMR T2 Spectrum
Simulation and Research of a Thermal Type Liquid Flow Sensor
The Design of Automatic Testing System of the Central Air-Conditioning Terminal Temperature Based on the Wireless Communication Mode
Design of Orientation Measuring System for Rotating Body with Body-Fixed Magnetic Sensors
Design of Solar Tracker Based on Image Sensor
Design of Parallel Control Structure of Alternating Current Servo System
Localization in Wireless Sensor Networks in Beacon Drifting Scenarios
Study on Doppler Velocity Measurement System
Architecture of Meteorology Observing System Based on Wireless Sensor Networks
Analysis and Solution about Overvoltage of Automatically Passing Neutral Section System
A New EV Energy Control System under V2G Mode
A High Speed Stacker Regulating Algorithm Based on Wireless Sensor Network
The Design of Millimeter-Level Ultrasonic Distance Measurement Circuit
A Computation Method for Symmetry
A Waist-Attached PNS Algorithm Based on MIMU
Research on the Parameter Estimating Algorithms of Image Edge Detection
The Optimal Switched Law Methods Analysis and Research on Switched Linear Systems
The Study of Wireless Sensor Networks Based On-Line Monitoring System for Fire
An Energy-Efficient QoS Routing Algorithm for Wireless Sensor Networks
Research and Improvement of LEACH Protocol for Wireless Sensor Networks
Moving Object Detection Based on Improved Variational GAC Model
MAN-B&W 10L90MC Main Engine a Starting Trouble of Remote Control System Analysis
A New Type of Tire Testing Machine and Finite Element Analysis of the Frame
Study on Parameter Transfer Structure of Generalized Modular Based Graph Theory
The Multi-Deformable Contact Analysis of Rotate Test Tree
Effect of the Pixel Photosensor Width on the Recovered Spectral Intensity in Interferometric Imagers and the Correction
Quantitative Analysis for SF6 and its Compositions in GIS
The Research of Vision Measurement System Based on Sequence Image
Testing Instrument for OPS in Hoisting Machinery
Paper Moisture Rate Measurement Based on the Spectral Analysis
Research and Development of a CNC Machine Tool Dynamic Characteristics Test and Analysis System
Chapter 13: Control System Simulation Technology
Simulation of Vector Control for Two Double Y Shift 30° PMSMs Series-Connected System
A New Method of Flame Image Segmentation
The Numerical Simulation of Full Flow Field of Roto-Jet Pump and Analysis of Energy Losses
Numerical Simulation on Spiral Hot Bending Process for End Sheet of Tubular Pile
Face Detection Method Using PCNN and Skin Color Model
The Construction of Cerebrovascular Model and Numerical Simulation
Spreading of Epidemics on Scale-Free Networks with Time Delay
Numerical Simulation of Aerodynamic Behaviors of High-Speed Trains Crossing
Exterior Ballistic Data Processing by SVD and Wavelet Transform
Theoretical Analysis and Simulation on Seeds Throw Process of Seedling-Sowing Machine
A Performance Model for U-Tube Ground-Coupled Heat Exchanger
Shifting Control and Simulation of Dual-Clutch Transmission
Traffic Fuzzy Controller's Improvement Based on Self-Adaptive Optimal Algorithm
Research of Feature Recognition Method Based on STEP-NC
Research of ATC Simulation Platform Based Compass Short Message
PLC and Inverter Communication-Based Seismic Simulation Platform Speed Control
Numerical Simulation of Primary Support Effect of Tunnel
The Simulation Platform of Network Control System
Design and Simulation Analysis of 1000KN·m Backstop
Research on Unmanned Aerial Vehicles Autonomous Soft Landing Based on Optimal Control
Modeling and Analyses of a Complex Airborne Antenna Positioner for Mechanical - Electromagnetic Analyses
The Modeling and Simulating of Conveyor Belt Based on ADAMS
Analysis and Simulation of a Parallel Platform with 2R-1T
Chapter 14: Mechatronics Technology
Research on a New Type of Hydraulic Oil Tank and a Working States Monitoring System for the Hydraulic System
MIMO System Stability Margin and its Flight Test Method
The Design of Parallel DC-DC Power
Power System Transient Stability Based on SVM
Decentralized Linear Permanent Magnet Synchronous Motor Control Using Harmonic Injection SPWM
Suppression of Superfluous Force of Electric Load Simulator
3D Model Transformation of Waveguide Slot Array Antenna in Mechanical-Electromagnetic Analyses
Research on Loading Method of Linear Motor Reliability Test
The New Measurement and Calculation Method for Dynamic Parameters of DC Motor Based on dSPACE System
The Design Principle and Application of Power Resistor with over Temperature and over Current Protection Function
Research on Servo System for CNC Machine Tool Driven by Permanent Magnet Synchronous Torque Motor
Carrier-Based Modulation Strategy and its Dead-Time Compensation Method on Two-Stage Matrix Converter
Implementation of Low Bandgap Reference Voltage Circuit for Power Management Applications
Running Speed Analysis of Car on Dual Strop Ropeway with Headwind Load
Genetic Algorithm Solving Capacitated Automatic Guided Vehicle System for Scheduling Problems
Optimized Non-Dead-Time Control of Inverter with Two-Phase Modulated SVPWM
Chapter 15: Automation Technology
Dynamic Responses of Mobile Elevating Work Platform and Mega Container Crane Structures
A Dynamic Game Approach for Analyzing the Coalitional Stability of Cascaded Hydropower Stations
The Application of Data Mining in the Ore Mixing of Sintering Process
Mechanism Analysis of Local Collapse in an Underground Powerhouse Based on Strength Reduction FEM and DEM
Profibus-DP Used in KDF4 Filter Rod Maker
Reliability Method of Cyber-Physical Systems Based on Events Polling and Interrupt Control
The Research and Application of Leveler Knowledge Base System
Visual Intelligent Vehicle Control System’s Design Based on PC9S12XS128 MCU
Evolutionary Structural Shape Optimization Based on Adaptive FEM and Boundary Representation of B-Spline
An Improvement on Randomly Changed Identification Protocol for Low-Cost Tags
Principle and Realization of 2D Maps on Virtools in Roaming System
Fluidized Bed Temperature Control System Based on Virtual Instrument Technology and Fuzzy PID Algorithm
A New Fault Diagnosis Method of Adaptive Demodulated Resonance Technique Based on Wavelet Packet in Multi-Information Domains
Analysis on Electronic Differential Control Strategies of Electric Vehicle
CFD Simulation and Experimental Study on Solid-Liquid Hydrocyclone
3D DNA Self-Assembly Model for Minimum Control Sets Problem
Design of Universal Experimental Interface Based on STM32
Study on Repairing Motherboard with Fuzzy Reasoning
Flour Bag Counting System Based on Machine Vision
The Design and Implementation of Online Meal Ordering System
The Influence of Data Imbalance on Feature Selection
Decision Approach of Multi-Agent Intelligent Decision Support System Based on Blackboard
The Research to Image Enhancing Method of Infrared Images
Generalized H2 Filtering for Discrete-Time Switched Systems with Multiple Time-Varying Delays
A Method of Robust Control for Nonlinear Inverted Pendulum System
Contour Extraction for Images of High Temperature Long Shaft Heavy Forgings
Adaptive Kalman Filter Based Aircraft Ground Icing Thickness Prediction
Optimal Tuning of Robust Controller Based on Artificial Bee Colony Algorithm
A Breeding Greenhouse Based on the Intelligent Control System
Carrier Wave Communication System of Spread Spectrum on Colliery Underground
A New Robust Controller for Flight Control System of Hypersonic Flying Vehicle
Proportional-Integral Control for Markovian Jumping Systems with Distributed Time Delay
Adult Image Detection Based on AdaBoost
Adaptive Convex Combination of Two RBF Networks and its Application to Nonlinear System Identification
Research on UCAV Efficiency Evaluation System Based on VxWorks
Self-Learning Genetic Algorithms for RGV Optimization Scheduling
Three-Dimensional Fuzzy Controller and its Optimizing
Fabric Defect Classification Based on Local Binary Patterns and Tamura Method
Fluid Structure Coupling Analysis of Ultrasonic Traveling Wave Driving
Distributed Control Strategy for Dynamic Supply Chain Network
Application of Unpiloted Aircraft in Land Resource Management of Sichuan Province
Analysis for Predictive Control Algorithm in District Heating
Chapter 16: Auto-Detection Technology
A Special Nonlinear Processing Method of Precise Digital Temperature Measurement with Platinum Thermistor
Remote Monitoring Control System of Yellow River Water Level Based on MCGS Configuration
Faraday Rotation Spectra Analysis on TbYbBiIG Crystals in Optical Communication Band
A New Extension Method in Diagnosis of Transformer Overheating Fault
Dynamic Reaction Fitting for Gaseous Formaldehyde Detector with Unmeasured Data Prediction
Digital Power Meter with Demand Control for Residential Energy Management
Microcontroller Based Single Axis Intelligent Control Sun Tracker for Parabolic Trough Collectors
Design and Analysis of Micro Plastic Heat Exchanger
Multiple Data Acquisition System Based on the AT89S52
Research and Application of the Piezoelectric Ceramic Ultrasonic Transducer
Optimal Sensor Placement Based on Simulation of Gas Distribution in Underground Heading Face
A Campus Safety Monitoring System Based on Ad-Hoc Network
Application of Online Thickness Monitoring Technology of Blast Furnace Stack
A Novel Quadrilateral Projection Positioning Algorithm to Improve Ranging Accuracy of High Speed Stackers
Research of the Paper Defect On-Line Inspection System Based on Distributed Machine Vision
Real-Time Online Monitoring of Transformer Losses and the Warning Devices
Studies on Detection Device of Polar Components for Quality Evaluation of Frying Oil
New Method of WSN Node Localization Based on MSVD
Carplant MES (WinCC HMI) System Design
Design of Intelligent Protector for Mine Magnetic Starter
Research and Application of Coordination Controller in Web Inspection System (WIS)
Calibration Method for On-Machine Composite Inspection of Machining Center
A Capacitance Based Circuit Design for Yarn Breaking Detection
Application of PLC in the Production Line of Ore
The Design of Automatic Test System Reliability for Wireless Data Link
Application of PLC in the Automatic Bundling Machine
Tracking Algorirthm Based on Location Prediction for Wireless Sensor Network
Image De-Noising in Mixed Noises Based on Wavelet Transform
The Application of HART Sensor Design in University Teaching Reform
The Design of Small Vehicles Based on Virtual Reality Technology
The Design of Company Attendance System Based on RFID and WSN
Logistics Technology Implantation for Food Cold Chain Based on VPT and IDEF0
Research on Applications of Piezoelectric Thin Film in Sport
A Qualitative Approach to Camera Motion Classification
Remote Monitoring System for Landslides Based on GSM Networks
The Errors Analysis of Flexure Rotation Joint of a Novel High Parallel Frequency Vibration Platform
An Approach Based on Wavelet Transform to Remove the Noises of ECG
Design of Office Intelligent Fire Monitoring System Based on ZigBee
A Robust MEWMA Control Chart Based on FAST-MCD Algorithm
The Realization of a New Algorithm of Video Image Noise Elimination Algorithm Based on FPGA
Flame Detection Based on Video
A Temperature-Measuring System on the Gun-Barrel Bore of Armor-Artillery Base on 80C196 MCU
Design of Urea-SCR Model of a Feedforward Controller Based on Simulation in Diesel Engine
Study on the Methods of Extract Key Tooth Code
Design of Variable Frequency Speed Control System Base on PLC and Fuzzy Algorithm
The Application of EtherCAT Fieldbus in Pure-Software Open CNC System
The Study of Vehicle Stability Based on Fuzzy Control
The Finite-Element Analysis of the Main Frame of the Airborne Photoelectric Platform
An Adaptive Pattern Recognition Algorithm in Coal Dust On-Line Measure
Research on the Variation of Average Temperature of Heat Conduction Process under the Second Boundary Condition
Back Analysis of Material Parameters of Concrete Dam Using Genetic Algorithm
The Peak Resolution of Diffuse X-Ray Diffraction Pattern of Tibetan Medicine
Application of Neural Network for Nonlinear Predictive Control
Non-Fragile Robust H∞ Control for Linear Uncertain Switched Systems with Delayed Perturbations
Real-Time Detection Method on Draft of Inland Departure Ships
Neural Network Inverse Decoupling Control of Flatness and Edge Drop for Tandem Cold Rolling Mill
Research on Intrusion Detection for the Internet of Things Based on Clone Selection Principle
Study on the Road Rigidity Detecting System Based on LabVIEW
Risk Analysis of Distributed Energy Source in the Smart Grid
Optimization Design of Marine Waste Heat Recovery System Based on PSO-GA Algorithm
Fabric Defect Detection Based on Local Entropy
The Liquid Level Measuring Device in Truck Based on ZigBee
Design of a Parallel Ultrasonic Inspection System for Wheels of High Speed Trains
Simulation Research on Urban Traffic Integration Control System Based on Multi-Agent
Chapter 17: Automatic Control Technology
Machining Process Parameters Optimization Based on Grid Optimization Algorithm
Comparative Study of Support Vector Machines and Neural Networks Used in Pattern Recognition
Fussy Assessment of Fatigue Strength of Spot-Welded Structures
A New Fast Similarity Metric Algorithm Based on Contour
Polynomial Model Set and its Interacting Multiple Model Algorithms
A Parametric System for Perforating Parts Based on the Secondary Development of AutoCAD
An Efficient Power Control Algorithm with Dynamic Channel Allocation for TDD/CDMA Systems
State Feedback Control for Fractional Differential Systems with Riemann-Liouville Derivative
The Study on Monitoring and Measuring System about the Blast Furnace Cooling Water’s Temperature Based on Wireless Network
A Video Abstraction Model Using a Genetic Algorithm
Sliding Mode Control Scheme for Uncertain Linear Systems
Arc Fault Recognition Method Based on Phase Space Reconstruction and Fractal Theory
EM-Based Nonideal Iris Boundary Localization
Research of Interpolation Algorithm for Improving the Movement Stability of X-Y Worktable of NC Machine
Stability Analysis for a Class of Linear Switched Positive Systems
Chaos Synchronization between Fractional-Order Unified Chaotic System and Rossler Chaotic System
A New Mistuning Form in Periodic Structure - Force Mistuning
Path-Following for a Cutting Tool Subject to Stochastic Disturbance
Study on Thread Foreign Matter Separation Key Technology Based on Intelligent Method
An Improved K-Medoids Clustering Algorithm
Control Algorithm of Interval-Valued Fuzzy Control
Multi-Objective Optimization Nonlinear Predictive Control Based on Small-World Optimization
Information Object Identification System Modeling and Visual Coding Rule Design
PSF Estimation and Image Restoration for Motion Blurred Images
Application of Similarity Theory in Research on Consistency in Multi-Resolution Modeling
Intrusion Detection Technique Based on the Grey Theory
One Algorithm for TDOA/AOA Combined Position
Research on UCAV Efficiency Evaluation Method
An Approach to Advanced XML Constraints Expression and Validation
The Research Based on Fast Motion Estimation of H.264
Study on Phase-Shifting Profilometry of Tilted Measurement System
Research for Improving the Process of Road Information Recognition on Grid Traffic Map
Analysis and Modeling of UML-Based Multiple Noise Measuring System
Research of SPWM Algorithm Based on Equivalent Area Compensation
Texture Image Recognition Algorithm Based on Steerable Pyramid Transform
Studies on Properties of Ants System
Tracking Control of Underactuated Unmanned Surface Vessels Based on the Dynamic Fuzzy Neural Network