Ludwig's Applied Process Design for Chemical and Petrochemical Plants Incorporating Process Safety Incidents - A. Kayode Coker

Ludwig's Applied Process Design for Chemical and Petrochemical Plants Incorporating Process Safety Incidents

Volume 1A

(Autor)

Buch | Hardcover
1326 Seiten
2024 | 5th edition
Elsevier - Health Sciences Division (Verlag)
978-0-323-91719-3 (ISBN)
189,95 inkl. MwSt
Ludwig’s Applied Process Design for Chemical and Petrochemical Plants Incorporating Process Safety Incidents is ever evolving starting with the first edition some 60 years ago. The volumes in this fifth edition provide improved techniques and fundamental design methodologies to guide the practicing engineer in designing process equipment and applying chemical processes to the properly detailed hardware. As indicative of the new title, process safety incidents are incorporated in many of the chapters, reviewing the root causes, and how these could be mitigated in future. Like its predecessor, this new edition continues to present updated information for achieving optimum operational and process conditions and to avoid problems caused by inadequate sizing and lack of internally detailed hardware. The volumes provide both fundamental theories where applicable and direct application of these theories to applied equations essential in the design effort. This approach in presenting design information is essential for troubleshooting process equipment and in executing system performance analysis. Volume 1A covers (chapters 1 - 6), process planning, flow-sheeting and scheduling, cost estimation and economic, physical properties of liquids and gases, fluid flow, mechanical separations. It builds upon Ernest E. Ludwig’s classic text to further enhance its use as a chemical engineering process design manual of methods and proven fundamentals. This new edition contains twelve chapters, which include new content on three-phase separation, mixing of liquids, ejectors, and mechanical vacuum systems, process safety and pressure relieving devices, metallurgy and corrosion, and optimization of chemical process/blending. The chapters in Volume 1A review pressure-relieving devices and provide case studies for process safety incidents, which are well illustrated from US Chemical Safety Hazard Investigation Board (www.csb.gov). Finally, this book contains an extensive glossary of Petroleum and Petrochemical Terminologies and Physical and Chemical Characteristics of Major Hydrocarbons

A. Kayode Coker PhD, is Engineering Consultant for AKC Technology, an Honorary Research Fellow at the University of Wolverhampton, U.K., a former Engineering Coordinator at Saudi Aramco Shell Refinery Company (SASREF) and Chairman of the department of Chemical Engineering Technology at Jubail Industrial College, Saudi Arabia. He has been a chartered chemical engineer for more than 30 years. He is a Fellow of the Institution of Chemical Engineers, UK (C. Eng., FIChemE), and a senior member of the American Institute of Chemical Engineers (AIChE). He holds a B.Sc. honors degree in Chemical Engineering, a Master of Science degree in Process Analysis and Development and Ph.D. in Chemical Engineering, all from Aston University, Birmingham, UK, and a Teacher’s Certificate in Education at the University of London, UK. He has directed and conducted short courses extremely throughout the world and has been a lecturer at the university level. His articles have been published in several international journals. He is an author of ten books in chemical and petroleum engineering, a contributor to the Encyclopedia of Chemical Processing and Design, Vol. 61, and a certified train – the mentor trainer. A Technical Report Assessor and Interviewer for chartered chemical engineers (IChemE) in the UK. He is a member of the International Biographical Centre in Cambridge, UK (IBC) as Leading Engineers of the World for 2008. Also, he is a member of International Who’s Who for ProfessionalsTM and Madison Who’s Who in the US.

1. Process planning, scheduling, and flowsheet design
2. Cost estimation and economic evaluation
3. Physical properties of liquids and gases
4. Fluid flow
5. Pumping of liquids
6. Mechanical separations/Three-Phase Separation
7. Mixing of liquids
8. Ejectors and mechanical vacuum systems
9. Process safety and pressure-relieving devices
10. Metallurgy and Corrosion
11. Process Safety Management/HAZOP and Hazard Analyses
12. Optimization of Chemical Process/Blending

Erscheinungsdatum
Verlagsort Philadelphia
Sprache englisch
Maße 216 x 276 mm
Gewicht 2950 g
Themenwelt Naturwissenschaften Chemie Technische Chemie
Technik Elektrotechnik / Energietechnik
ISBN-10 0-323-91719-4 / 0323917194
ISBN-13 978-0-323-91719-3 / 9780323917193
Zustand Neuware
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich

von Manfred Baerns; Arno Behr; Axel Brehm; Jürgen Gmehling …

Buch | Hardcover (2023)
Wiley-VCH (Verlag)
94,90
erneuerbare Energien und Speichertechnologien für die Energiewende

von Jürgen Karl

Buch | Softcover (2023)
De Gruyter Oldenbourg (Verlag)
69,95
Daten, Formeln, Normen, vergleichende Betrachtungen

von Walter Bierwerth

Buch | Softcover (2024)
Europa-Lehrmittel (Verlag)
38,90