Understanding Data Communications - Gilbert Held

Understanding Data Communications

From Fundamentals to Networking

(Autor)

Buch | Hardcover
880 Seiten
2000 | 3rd edition
John Wiley & Sons Inc (Verlag)
978-0-471-62745-6 (ISBN)
172,38 inkl. MwSt
Aimed at the senior level undergraduate and graduate computer science student, this book provides an introduction to the field of data communications. Assuming no prior knowledge of the field, it explains of the role of communications, and the fundamental concepts of using the ISO's 7-layer approach to present the various aspects of networking.
Now in its third edition, Understanding Data Comunications, provides a comprehensive introduction to the field of data communications for both students and professionals. Assuming no prior knowledge of the field, it presents an overview of the role of communications, their importance, and the fundamental concepts of using the ISO's 7-layer approach to present the various aspects of networking.
* Covers the evolving high speed network access via digital subscriber line, cable modems and wireless communication.
* Examines the role of regulatory and standardization bodies, the operation of the Internet and the use of a variety of electronic applications.
* Includes a series of comprehensive questions covering the important concepts from each section.
* Describes the digital network used by communications carriers and the methods used to obtain access to the digital highway.
* Discusses frequency division multiplexing which forms the foundation for the operation of several types of high speed digital subscriber line.
Aimed at the senior level undergraduate and graduate computer science student, it is also essential reading for data processing professionals and those involved in computer science and data communications.

Gilbert Held is an internationally recognized author and lecturer who specializes in the applications of computer and communications technology. With over 30 years ofexperience in managing communications networks, he conducts seminars on topics that include LAN/WAN internetworking, data compression, and PC hardware and software. Held has written numerous books on computers and communications technology and has been recognized for his technical excellence in writing.

Preface xix

Acknowledgements xxi

1 Communications in a Modern Society 1

1.1 Applications 1

1.1.1 Data collection 2

1.1.2 Transaction processing 3

1.1.3 Conversational time sharing 5

1.1.4 Remote job entry 7

1.1.5 Message switching 7

1.1.6 Value-added carriers and electronic mail 8

1.1.7 office automation 12

1.1.8 Electronic commerce 14

1.1.9 Satellite transmission 16

1.2 Constraints 16

1.2.1 Throughput 17

1.2.2 Response time 18

1.2.3 Bandwidth 18

1.2.4 Economics 19

1.3 Emerging Trends 19

1.4 Review Questions 20

2 Basic Telegraph and Telephone Operations 23

2.1 Evolution of Communications 23

2.2 Telegraphy 24

2.2.1 Operation 24

2.2.2 Morse code 26

2.2.3 Morse code limitations 27

2.2.4 Start-stop signaling and the Baudot code 28

2.2.5 Bits and codes 29

2.3 Telephony 32

2.3.1 Principle of operation 32

2.3.2 Sound wave conversion 34

2.3.3 The basic telephone connection 36

2.3.4 Switchboards and central offices 37

2.3.5 Numbering plans 39

2.3.6 Geographic calling areas and network routing 40

2.3.7The world numbering plan 43

2.4 Review Questions 43

3 Basic Circuit Parameters, Measurement Units and Media Overview 47

3.1 Basic Circuit Parameters 47

3.1.1 Frequency and bandwidth 47

3.1.2 The telephone channel passband 49

3.2 Measurement Units 50

3.2.1 Power ratios 50

3.2.2 Signal-to-noise ratio 52

3.2.3 Reference points 54

3.3 Media Overview 56

3.3.1 Twisted-pair cable 56

3.3.2 Coaxial cable 61

3.3.3 Microwave 63

3.3.4 Fiber-optic transmission 64

3.4 Channel Capacity 67

3.4.1 Bit versus baud 67

3.4.2 Nyquist relationship 67

3.4.3 Shannon's law 68

3.5 Structured Wiring 69

3.5.1 The wiring closet 69

3.5.2 The EIA/TIA-568 standard 69

3.6 Review Questions 72

4 Fundamental Data Transmission Concepts 75

4.1 Analog Line Connections 75

4.1.1 The analog switched line 76

4.1.2 Analog leased line 79

4.1.3 Dedicated line 82

4.1.4 Switched network vs leased line economics 83

4.2 Types of Service and Transmission Devices 84

4.2.1 Digital repeaters 85

4.2.2 Modems 86

4.2.3 Acoustic couplers 87

4.2.4 Analog facilities 89

4.2.5 Digital facilities 93

4.2.6 Digital signaling 93

4.2.7Representative AT&T digital offerings 96

4.3 Transmission Mode 98

4.3.1 Simplex transmission 98

4.3.2 Half-duplex transmission 99

4.3.3 Full-duplex transmission 100

4.3.4 Terminal and mainframe computer operating modes 101

4.4 Transmission Techniques 103

4.4.1 Asynchronous transmission 103

4.4.2 Synchronous transmission 105

4.5 Types of Transmission 106

4.6 Wide Area Network Transmission Structures 107

4.6.1 Mainframe computer-based network structure 108

4.6.2 LAN network structure 109

4.6.3 LAN internetworking structure 110

4.7Line Discipline 111

4.8 Transmission Rate 113

4.8.1 Analog service 113

4.8.2 Digital service 114

4.9 Transmission Codes 115

4.9.1 Morse code 115

4.9.2 Baudot code 116

4.9.3 BCD code 116

4.9.4 Extended binary-coded decimal interchange code (EBCDIC) 116

4.9.5 ASCII code 118

4.10 Review Questions 122

5 Terminals, Workstations and WAN and LAN Networking Overview 125

5.1 Terminals 126

5.1.1 Interactive terminal classi®cation 126

5.1.2 Terminal evolution 127

5.2 Workstations and Other LAN Components 141

5.2.1 Network interface card 141

5.2.2 Hubs 142

5.2.3 File server 143

5.2.4 Print server 145

5.2.5 Other types of servers 146

5.3 Wide Area Networking Overview 146

5.3.1 Multiplexing and data concentration 146

5.3.2 Front-end processor 151

5.3.3 Network configurations 151

5.4 Local Area Networking Overview 152

5.4.1 Repeaters 153

5.4.2 Bridges 153

5.4.3 Routers 154

5.4.4 Gateways 155

5.5 Review Questions 157

6 Representative Standards Organizations: the OSI Reference Model 159

6.1 National Standards Organizations 160

6.1.1 American National Standards Institute (ANSI) 160

6.1.2 Electronic Industries Association (EIA) 161

6.1.3 Federal Information Processing Standards (FIPS) 163

6.1.4 Institute of Electrical and Electronic Engineers (IEEE) 163

6.1.5 British Standards Institution (BSI) 164

6.1.6 Canadian Standards Association (CSA) 164

6.2 International Standards Organizations 164

6.2.1 International Telecommunications Union (ITU) 164

6.2.2 International Standards Organization (ISO) 165

6.3 De facto Standards 167

6.3.1 AT&T compatibility 168

6.3.2 Cross-licensed technology 169

6.3.3 Bellcore/Telcordia Technology 169

6.3.4 Internet standards 170

6.4 The OSI Reference Model 171

6.4.1 Layered architecture 172

6.4.2 OSI layers 173

6.4.3 Data flow 176

6.5 IEEE 802 Standards 177

6.5.1 802 committees 177

6.5.2 Data link subdivision 179

6.6 Review Questions 180

7 The Physical Layer, Cables, Connectors, Plugs and Jacks 183

7.1 DTE/DCE Interfaces 184

7.1.1 Connector overview 186

7.1.2 RS-232-C/D 188

7.1.3 Differential signaling 198

7.1.4 RS- 449 200

7.1.5 V. 35 202

7.1.6 RS-366-A  203

7.1.7 X.21 and X. 20 204

7.1.8 X.21 bis 207

7.1.9 RS- 530 207

7.1.10 High Speed Serial Interface 298

7.1.11 High Performance Parallel Interface 214

7.1.12 Universal Serial Bus 216

7.1.13 IEEE 1394 (FireWire) 218

7.2 Cables and Connectors 222

7.2.1 Twisted-pair cable 222

7.2.2 Low-capacitance shielded cable 223

7.2.3 Ribbon cable 223

7.2.4 The RS-232 null modem 223

7.2.5 RS-232 cabling tricks 225

7.3 Plugs and Jacks 226

7.3.1 Connecting arrangements 228

7.3.2 Telephone options 230

7.3.3 Ordering the business line 231

7.3.4 LAN connectivity 232

7.4 Review Questions 233

8 Basic Transmission Devices: Line Drivers, Modems, and Service Units 235

8.1 Line Drivers 236

8.1.1 Direct connection 236

8.1.2 Using line drivers 239

8.2 Modem Operations 243

8.2.1 The modulation process 243

8.2.2 Bps vs. baud 246

8.2.3 Voice circuit parameters 246

8.2.4 Combined modulation techniques 247

8.2.5 Mode of transmission 253

8.2.6 Transmission techniques 254

8.2.7 Modem classiffication 255

8.2.8 Limited-distance modems 256

8.2.9 Line-type operations 257

8.2.10 Reverse and secondary channels 257

8.2.11 Equalization 258

8.2.12 Synchronization 260

8.2.13 Multiport capability 260

8.2.14 Security capability 261

8.2.15 Multiple speed selection capability 261

8.2.16 Voice/data capability 262

8.2.17Modem handshaking 262

8.2.18 Self-testing features 263

8.2.19 Modem indicators 265

8.2.20 Modern operations and compatibility 265

8.3 Intelligent Modems 289

8.3.1 Hayes command set modems 289

8.3.2 Key intelligent modem features 296

8.3.3 Microcom Networking Protocol (MNP) 302

8.3.4 Data compression 306

8.3.5 MNP Class 5 compression 306

8.3.6 MNP Class 7enhanced data compression 308

8.3.7V.42bis 311

8.4 Broadband Modems 312

8.4.1 Telephone and cable TV infrastructure 313

8.4.2 Cable modems 317

8.4.3 DSL modems 324

8.5 Service Units 330

8.5.1 The DSU 331

8.5.2 The CSU 331

8.6 Review Questions 332

9 Regulators and Carriers 335

9.1 Regulators 336

9.1.1 US regulatory evolution 336

9.1.2 International regulatory authorities 342

9.2 Carrier Offerings 343

9.2.1 AT&T system evolution 343

9.2.2 The Bell system 345

9.2.3 The regional Bell operating companies 346

9.2.4 AT&T service offerings 349

9.2.5 Regional Bell operating company offerings 355

9.3 ATM Overview 356

9.4 Review Questions 357

10 Transmission Errors: Causes, Measurements and Correction Methods 359

10.1 Causes of Transmission Errors 359

10.2 Performance Measurements 360

10.2.1 Bit error rate 360

10.2.2 Bit error rate tester 360

10.2.3 BERT time 362

10.2.4 Performance classiffications 362

10.2.5 Block error rate testing 364

10.2.6 Error-free second testing 365

10.3 Error Detection and Correction Techniques 365

10.3.1 Asynchronous transmission 365

10.3.2 Synchronous transmission 370

10.4 Review Questions 374

11 The WAN Data Link Layer 377

11.1 Terminal and Data Link Protocols: Characteristics and Functions 378

11.1.1 Transmission sequence 379

11.1.2 Error control 379

11.2 Types of Protocol 380

11.2.1 Teletypewriter protocols 380

11.2.2 PC file transfer protocols 385

11.2.3 Bisynchronous protocols 395

11.2.4. Digital Data Communications Message Protocol (DDCMP) 400

11.2.5 Bit-oriented line control procedures 402

11.3 Review Questions 407

12 Increasing WAN Line Utilization 409

12.1 Multiplexers 410

12.1.1 Evolution 410

12.1.2 Device support 410

12.1.3 Multiplexing techniques 411

12.2 Control Units 439

12.2.1 Control unit concept 440

12.2.2 Attachment methods 440

12.2.3 Unit operation 442

12.2.4 Breaking the closed system 443

12.3 Review Questions 445

13 Local Area Networks 449

13.1 Origin 449

13.2 Comparison with WANs 450

13.2.1 Geographical area 450

13.2.2 Data transmission and error rates 450

13.2.3 Ownership 451

13.2.4 Regulation 451

13.2.5 Data routing and topology 451

13.2.6 Type of information carried 452

13.3 Utilization Benefits 452

13.3.1 Peripheral sharing 453

13.3.2 Common software access 453

13.3.3 Electronic mail 453

13.3.4 Gateway access to mainframes 453

13.3.5 Internet access 453

13.3.6 Virtual private network operations 454

13.4 Technological Characteristics 454

13.4.1 Topology 454

13.4.2 Comparison of topologies 456

13.4.3 Signaling methods 457

13.4.4 Transmission medium 460

13.4.5 Access methods 460

13.5 Ethernet Networks 465

13.5.1 Original network components 465

13.5.2 IEEE 802.3 networks 468

13.5.3 Frame composition 490

13.5.4 Media access control overview 495

13.5.5 Logical link control overview 495

13.5.6 Other Ethernet frame types 498

13.6 Token-Ring 504

13.6.1 Topology 504

13.6.2 Redundant versus non-redundant main ring paths 506

13.6.3 Cabling and device restrictions 507

13.6.4 Constraints 510

13.6.5 High speed Token-Ring 514

13.6.6 Transmission formats 515

13.6.7Medium access control 524

13.6.8 Logical link control 527

13.7Review Questions 528

14 Basic LAN Internetworking 531

14.1 Bridge Operations 531

14.1.1 Types of bridge 531

14.1.2 Network utilization 544

14.2 The Switching Hub 546

14.2.1 Basic components 546

14.2.2 Delay times 547

14.2.3 Key advantages of use 549

14.2.4 Switching techniques 549

14.2.5 Port address support 553

14.2.6 Switching architecture 556

14.2.7High-speed port operations 557

14.2.8 Summary 558

14.3 Router Operations 558

14.3.1 Basic operation and use of routing tables 559

14.3.2 Networking capability 560

14.3.3 Communication, transport and routing protocols 561

14.3.4 Router classiffications 563

14.3.5 Routing protocols 566

14.4 Review Questions 575

15 Digital Transmission Systems and Equipment 577

15.1 The T and E Carriers 578

15.1.1 Channel banks 578

15.2 T1 Multiplexers 596

15.2.1 Waveform-based voice digitization modules 597

15.2.2 Vocoding 598

15.2.3 Hybrid coding 601

15.2.4 T1 multiplexer employment 602

15.3 The T3 Carrier 605

15.3.1 T3 circuit types 606

15.3.2 Evolution 606

15.3.3 T3 framing 609

15.4 DDS, ASDS and KiloStream facilities 615

15.4.1 Applications 616

15.4.2 ASDS 616

15.4.3 KiloStream service 617

15.5 Integrated Services Digital Network (ISDN) 619

15.5.1 Concept behind ISDN 619

15.5.2 ISDN architecture 620

15.5.3 Network characteristics 621

15.5.4 ISDN layers 625

15.6 Review Questions 628

16 Network Architecture 631

16.1 SNA Overview 632

16.1.1 SNA elements 634

16.1.2 System Service Control Point (SSCP) 634

16.1.3 Network nodes 634

16.1.4 The physical unit 635

16.1.5 The logical unit 635

16.1.6 SNA network structure 635

16.1.7Types of physical unit 637

16.1.8 Multiple domains 637

16.1.9 SNA layers 639

16.1.10 SNA developments 641

16.1.11 SNA sessions 641

16.2 Advanced Peer-to-Peer Networking (APPN) 644

16.2.1 APPC concepts 644

16.2.2 APPN architecture 645

16.2.3 Operation 646

16.3 TCP/IP 649

16.3.1 The rise of the Internet 650

16.3.2 The TCP/IP protocol suite 651

16.3.3 Applications 653

16.3.4 TCP/IP communications 663

16.3.5 The Internet Protocol (IP) 664

16.3.6 Domain Name Service 679

16.4 Internetworking 681

16.4.1 SNA gateway operations 682

16.4.2 Supporting multiple protocols 690

16.4.3 Data Link Switching 693

16.5 Review Questions 694

17 Packet Networks 697

17.1 Packet Switching Overview 698

17.2 X.25 Networks 700

17.2.1 Development period 700

17.2.2 Need for PADs 700

17.2.3 X.25 layers 705

17.2.4 Methods of connection 708

17.2.5 Utilization costs 709

17.2.6 Tymnet 711

17.2.7 Network information 713

17.2.8 Features 713

17.2.9 Protocol conversion 715

17.2.10 LAN interconnectivity 716

17.3 Frame Relay 717

17.3.1 Comparison to X. 25 717

17.3.2 Standards 719

17.3.3 Network access 720

17.3.4 Frame construction 721

17.3.5 Service parameters 729

17.3.6 FRAD features 734

17.3.7 Voice over Frame Relay 740

17.4 Review Questions 745

18 Communications Software 749

18.1 Terminal Emulation Software Features 749

18.1.1 Hardware utilization 752

18.1.2 Software utilization 753

18.1.3 Operational consideration 754

18.1.4 Documentation 757

18.1.5 Dialing 757

18.1.6 Transmission 762

18.1.7Performance efficiency 766

18.1.8 Performance flexibility 770

18.1.9 Security performance 772

18.2 Terminal Emulation Program Examination 774

18.2.1 Procomm Plus for Windows 775

18.2.2 HyperTerminal 777

18.2.3 IBM PC/ 3270 780

18.3 Web Browsers 783

18.3.1 Microsoft Internet Explorer 784

18.3.2 LAN operation 788

18.4 Review Questions 789

19 Fiber-Optic, Satellite and Wireless Terrestrial Communications 791

19.1 Fiber-Optic Transmission Systems 792

19.1.1 System components 792

19.1.2 Transmission advantages 799

19.1.3 Limitations of use 801

19.1.4 Utilization economics 802

19.1.5 Carrier utilization 805

19.1.6 SONET 806

19.2 Satellite Communications Systems 810

19.2.1 Operation overview 810

19.2.2 Satellite access 810

19.2.3 Very small aperture terminal (VSAT) 812

19.2.4 Low earth orbit satellites 812

19.3 Wireless Terrestrial Communications 814

19.3.1 Cellular communications 814

19.3.2 Wireless LANs 820

19.4 Review Questions 821

20 Evolving Technologies 823

20.1 ATM 823

20.1.1 Cell size 823

20.1.2 Scalability 824

20.1.3 Transparency 825

20.1.4 Traffic classiffication 825

20.2 The ATM Protocol Stack 825

20.2.1 ATM Adaptation Layer 825

20.2.2 The ATM Layer 826

20.2.3 Physical Layer 827

20.3 ATM Operation 827

20.3.1 Components 827

20.3.2 Network Interfaces 829

20.3.3 The ATM cell header 830

20.3.4 ATM connections and cell switching 833

20.4 Virtual Private Networking 835

20.4.1 Rationale for use 836

20.4.2 Reliability 837

20.4.3 Problem areas 837

20.5 Review Questions 838

Index 841

Erscheint lt. Verlag 19.12.2000
Verlagsort New York
Sprache englisch
Maße 194 x 257 mm
Gewicht 1758 g
Einbandart gebunden
Themenwelt Mathematik / Informatik Informatik Netzwerke
Technik Elektrotechnik / Energietechnik
ISBN-10 0-471-62745-3 / 0471627453
ISBN-13 978-0-471-62745-6 / 9780471627456
Zustand Neuware
Haben Sie eine Frage zum Produkt?
Wie bewerten Sie den Artikel?
Bitte geben Sie Ihre Bewertung ein:
Bitte geben Sie Daten ein:
Mehr entdecken
aus dem Bereich
Ein einführendes Lehrbuch

von Wolfgang Riggert; Ralf Lübben

Buch | Hardcover (2022)
Hanser, Carl (Verlag)
34,99
das umfassende Handbuch für den Einstieg in die Netzwerktechnik

von Martin Linten; Axel Schemberg; Kai Surendorf

Buch | Hardcover (2023)
Rheinwerk (Verlag)
29,90
von den Grundlagen zur Funktion und Anwendung

von Rüdiger Schreiner; Oliver P. Waldhorst

Buch (2023)
Carl Hanser (Verlag)
29,99