Proceedings og European Metallurgical Conference EMC 2007 - Volume 4
GDMB Verlag
978-3-940276-07-0 (ISBN)
- Keine Verlagsinformationen verfügbar
- Artikel merken
Table of Contents – Volume 4
Electronic Scrap Processing
Electronic scrap treatment by plasma gasification and smelting process
Prof. Ing. Ivan Imriš, Dr. Sc, Assoc. Prof. RN Dr. Alexandra Klenovčanová, PhD.
Lead way for E-scrap processing
Petr Janda
Electronic waste (e-waste) disposal, reuse and recycle technologies
Prof. Dr. Muammer Kaya
Recovery of aluminum from shredded aluminum electrolytic capacitors with dry shaking table
Hiroshi Nakazawa
Improving Printed Circuit Board Physical Processing – An overview
Ogunniyi, I. O., Dr. Vermaak, M. K. G.
Recovering of electronic scrap metals Modern sorting processes in practical application
Dipl.-Wirtsch.-Ing. (FH) Jörg Schunicht
Scrap – an Excellent Raw Materia
Prof. Dr.-Ing. Michael Stelter
Process Control / Process Modelling
Transforming Flash Furnace Feed and Burner Stability: Optimizing Furnace Performance and Productivity
M E Reed, C U Jones, P A Cockburn, R C Sims, P E Walker, M Coleman, B Snowdon
Model-based slopping monitoring by change detection with high resolution audio data
Ing. Magnus Evestedt, Prof.-Dr. Alexander Medvedev
METTOP Process Control and Regulation System
Dr. Iris Filzwieser, Dr. Andreas Filzwieser
Predicting phase equilibria in oxide and sulphide systems
Dr John A Gisby, Dr Alan T Dinsdale, Dr Pekka A Taskinen
Industrial Applications of Laser Induced Plasma Spectroscopy (LIPS) for Process Control and Sorting in Mining and Metallurgy
Dr. Johann Gruber, Mag. Max Dallinger, Dr. Thomas Gumpenberger, Dr. Norbert Huber, Walter Schaller, Dipl.-Ing. René Wieshofer
Using the ITDS FactSage for Metallurgical Applications
Dr. Klaus Hack, Dr. Gunnar Eriksson, Dr. Stephan Petersen
Through Process Modelling in Aluminium Semi Production
Prof. Dr.-Ing. Jürgen Hirsch
Experimental measurement and prediction of complex phase equilibria in industrial non-ferrous slag systems
E. Jak, B. Zhao, S. Nikolic and P.C. Hayes
Thermodynamic modelling of the behaviour of accompanying elements in secondary copper production
Thomas Messner, Stefan Pogatscher, Helmut Antrekowitsch, Josef Pesl
New rolling mill controls based on innovative process-models
Dipl. Ing. Rainer Neukant
SimuSage – The Component Library for Rapid Process Modeling
Dr.-Ing. Stephan Petersen, Dr. rer. nat Klaus Hack, Dr.-Ing. Peter Monheim
Lifetime assessment of cyclic thermo-mechanical loaded strip casting mills
Dipl.-Ing. Bernd Prillhofer, Dipl.-Ing. Dr.mont. Martin Riedler, Univ.Prof. Dipl.-Ing. Dr. techn. Wilfried Eichlseder
Development of Sustainable Processes with new HSC Chemistry 6.0 Software
Dr. Antti Roine, Tuukka Kotiranta M.Sc.
Enhancement of Yield in Continuous Casting
M.Sc. Erkki Saarelainen, M.Sc. Juha Alatalo
Modelling and analysis of pouring flow rate to prevent the splash in sand-mold press casting
Chim Samnang, Noda Yoshiyuki, Terashima Kazuhiko, Hashimoto Kunihiro
Enhancement and defined regulation of metal quenching using atomized sprays
Prof. Dr.-Ing. Eckehard Specht, Dipl.-Ing. Jacek Król
Physical Metallurgy / Process Fundamentals
Phase relations in stainless steel slags
Ir. S. Arnout, Dr. M. Guo, Ir. D. Durinck, Dr. P.T. Jones, Prof. B. Blanpain, Prof. P. Wollants
Study of the precipitation kinetics in AlMgZn alloys by using DSC
Dipl.-Ing. Susanne Koch, Ao.Univ.-Prof.Dipl.-Ing.Dr.mont. Helmut Antrekowitsch
In-situ Observation of the Dissolution of Spherical Alumina Particles in CaO-Al2O3-SiO2 Melts
Junhu Liu, Frederik Verhaeghe, Muxing Guo, Bart Blanpain, Patrick Wollant
Preparation and Properties of Lead Free Copper Alloy Castings with Dispersed Sulfide Particles
Dr. Toru Maruyama, Mr. Hiroaki Wakai, Mr. Takashi Sugitani, Dr. Hiroshi Nishiuchi, Dr. Hiroyuki Abe, Mr. Kazuteru Hirose, Mr. Ryozo Matsubayashi, Dr. Takeshi Kobayashi
Influence of Si Content and Cooling Rates on the Size of SDAS and the Latent Heat Released in Al-Si(5-11)-Cu1 Alloys
Dr.–Ing. Zoran Odanović, Dr.–Ing. Mile Djurdjević, Dr.–Ing. Vencislav Grabulov, Prof. Dr.–Ing. Jerry Sokolowski
Structure and Thermal Expansion of Iron and Nonferrous Metals Sulphides
Dr.-Ing. Evgeniy N. Selivanov, Dr. Roza I. Gulyaeva, Dr.-Ing. Vladimir M. Chumarev
Energetics and Effects of Mechanical Activation of Materials
S. Srikanth, C. Sasikumar, Rakesh Kumar
Poster
Potential of magnesium refining through intermetallic precipitation
MSc. Semiramis S. Akbari; Dr.-Ing. A. Arnold; Prof. Dr.-Ing. Bernd Friedrich
The Reco-Dust Process
Dr. Jürgen Antrekowitsch
Enhancement of Energy and Resource Efficiency and Reduction of Greenhouse Gas Emissions in the Iron and Steel Industry and the Zinc Industry
Magnus Fröhling, Hauke Bartusch, Otto Rentz
Intensification of Slag-Treatment in the EAF / SAF by Coke Injection
Dipl.-Ing. J. Böhlke; Prof. Dr.-Ing. B. Friedrich
Extraction model for nickel/cobalt separation using bifunctional extractants
Dr. A. Fortuny, Dra. M. T. Coll, Dra. A. M. Sastre
Effect of different anode materials on electrolysis of Cr from synthetic Cr-alum solution
M.Sc. A. Gamze Onuk, Assoc.Prof.Dr. Sebahattin Gürmen, Prof.Dr. Cüneyt Arslan
Effect of Aging on the Mechanical Properties of Gold Alloys
M.Sc. Aybars Güvena, M.Sc. Mesut Emreb, Prof. Dr. –Ing. Servet Timura
Separation of Co(II) and Li(I) ions by supported liquid membrane using Cyanex 272
Dr.-Eng. Jinki Jeong, Mr. Basudev Swain, Dr.-Eng. Kyung Keun You, Dr.-Eng. Min Seuk Kim, Dr.-Eng. Jae-chun Lee, Prof. Dr.-Sc. Gae-Ho Lee
Induction Brazing of TiAl Alloys to Steel-Brazed Joints for Automotive Turbocharger Rotor
Dr. Myoung-Gyun Kim, Gyu-Chang Lee and Young-Jig Kim
Impact of Phase Transformations during Homogenisation on Mechanical Properties of AlMgSi-Alloys
Dipl.-Ing. Susanne Koch, Ao.Univ.-Prof. Dipl.-Ing. Dr.mont. Helmut Antrekowitsch
Combination of TiO2-chlorination and Ti-reduction in molten salt electrolysis
Dipl.-Ing. C. Kommer; Prof. Dr.-Ing. B. Friedrich
Recycling of silicon from photovoltaic production sludge
Dipl.-Ing. A. Lützerath; Prof. Dr.-Ing. B. Friedrich
Metallurgical process optimization through the combination of controlled gas purging using RHI Refractories’ COP KIN system and multi-dimensional refractory analyses
Dr. Thomas Prietl, Dipl.-Ing. Bernhard Handle
Modeling of surface properties of multicomponent iron solutions
Dr. Krzysztof Pytel, Dr. Jerzy Iwanciw, Dr. Elżbieta Kawecka-Cebula, Dr. Magdalena Kostołowska
Prereduction of raw material for the production of ferroalloys
DI Robert Ressel, Dr. mont. Stefan Luidold, Ao. Univ. Prof. Dr.mont. Helmut Antrekowitsch,Dr. mont. Markus Hochenhofer
Electrocoagulation Treatment of Wastewater from Copper Production
MSc. Jackson Rodriguez, Dr.-Ing. Srećko Stopić, Prof. Dr.-Ing. Bernd Friedrich
The stabilization of polluted soil using a waste material
Dipl.-Chem. Mihaela Ulmanu, Dipl.-Eng. Ildiko Anger, Dr.-Chem. Eugenia Gament, Dipl.-Eng.Georgiana Olanescu, Dipl.-Eng. Cornel Motoc
New hydrometallurgical technology for processing of lead sulphide concentrates
Dr.-eng. Teodor Velea, Dipl.-eng. Vasile Predica, Dr.-eng Liliana Gherghe
Effect of Zn Contents on Properties of Sulfide Dispersed Lead Free Copper Alloy Castings
Hiroaki Wakai, Takashi Sugitani, Hiroshi Nishiuchi, Hiroyuki Abe, Kazuteru Hirose,Ryozo Matsubayashi, Dr. Eng. Toru Maruyama, Prof. Dr. Takeshi Kobayashi
Mg thin Strip Casting (produced by twin-roll-process)
Dipl.-Ing. Jian Zeng, Prof. Dr.-Ing. Bernd Friedrich
Autors Index
Keywords Index
Preface This time the biennial international European Metallurgical Conference, the fourth since its incipience in the year 2001, is being organized in the city of Düsseldorf, from June 11 to June 14, 2007. – This year’s Conference site and date were selected, to make it coincide with the quadrennial tradefair Metec, the major international metallurgical technology exhibition, and the associated tradeshows Gifa (Foundry Technology), Thermprocess (Industrial Heat Treatment Technology) and Newcast (Casting Products and Applications). The German Conference Organizer, GDMB, the Society for Mining, Metallurgy, Resource and Environmental Technology, expects from the decision of this combination synergetic effects, providing the Conference delegates in addition the opportunity to learn about the latest developments on the market in the field of metallurgical processing and manufacturing. – During EMC 2007, there will be presented in 5 parallel sessions during the 3 days of the Conference, around 160 papers on multiple subjects of interest, relating to the winning of non-ferrous metals, manufacturing and their applications, as well as on sustainable technologies and sustainability issues in the non-ferrous metals industry. The response of invited key people from industry and academic institutions to speak about the wide spectrum of sustainability items was overwhelming and GDMB is proud to be able to address actual topics on the widely diversified aspects of sustainability in the EMC Conference program. – Not only the fact that the papers do originate from about 40 countries over the world, but also the constellation of the Plenary Session of EMC 2007 highlight the international character of this Conference. In the 12 Plenary Sessions, renowned Speakers representing all continents will outline worldwide developments not only of actual interest and but also of concern, thereby bringing forward to the audience the achievements, trends and evolution in their respective countries and regions of the world. – Conference internationality is of prime concern to GDMB, in order to maximize exchange of ideas and enhance distribution of know-how and technological development to the benefit of the delegates. The comprehensive support of Eurométaux to the EMC 07, as in the preceding EMC Conferences, underlines the conformity of policies of this most important European Industry Organization also in terms of enhancement of the European international profile in the globalizing world. – The Conference delegates and the international community will have in the 4 volumes of the EMC 2007 Proceedings the opportunity to evaluate in detail in the peer reviewed manuscripts what the presenters already outlined in their speeches. Our peer reviewers took time and made sure that quality of content of the manuscripts is relevant and of genuine interest, whereas the GDMB staff, together with the Scientific Committee, took care about the uniformity of their publication. As with the former EMC Conferences, plenary paper manuscripts are published in the worldwide circulated GDMB Journal, Erzmetall – World of Metallurgy, of which the first five are appearing in the May-June 2007 issue, available at the Conference. –Thanks are expressed firstly to the presenters of the papers and authors of the manuscripts, to the chairpersons of the 40 sessions, to the many manuscript peer reviewers, to the individual members of the EMC Committees, as well as to the GDMB Staff who did realize these Proceedings and, last not least, to the Cosponsoring Societies for their invaluable material and organizational assistance, and the Company Sponsors for their financial support to the Conference. – GDMB looks forward that this EMC 2007 meeting be an enjoyable, fruitful but, above all, an interesting venue to the Conference participants and Companions in the not-less interesting surroundings of the city of Düsseldorf within the background atmosphere of the coinciding metallurgical tradefares.
| Vorwort | Norbert L Piret |
|---|---|
| Sprache | englisch |
| Einbandart | Paperback |
| Themenwelt | Technik |
| Schlagworte | Electronic Scrap Processing • EMC 2007 • European Metallurgical Conference 2007 • Physical Metallurgy • Poster • Process Control • Process Fundamentals • Process Modeling |
| ISBN-10 | 3-940276-07-3 / 3940276073 |
| ISBN-13 | 978-3-940276-07-0 / 9783940276070 |
| Zustand | Neuware |
| Haben Sie eine Frage zum Produkt? |
aus dem Bereich
