Renewable Energy and Power Technology II

Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
Application of Improved Invariant Moments and SVM in the Recognition of Solar Cell Defects
Case Analysis of the Solar Heating System Assisted by Condensing Wall-Mounted Gas Heater
Case Study: Environmental, Techno-Economic Feasibility Analysis of Grid-Connected Photovoltaic Power Plants in China Using RETScreen
Design and Application of a Seasonal Solar Soil Heat Storage System Applied in Greenhouse Heating
Design and Development of Intelligent LED Plant Light Supplement System Based on Solar-Powered for Facility Agriculture
Development of Solar Cell Module Cooling Device Using Coolant Circulation and Control System
Development Prospect of Chinese Photovoltaic Industry with Scenario Analysis
Economic and Environmental Assessments of Two Installation Types of Photovoltaic Systems in Shanghai
Electrical Performance Results Comparison of Photovoltaic Module between Two ISO 17025 Certified Laboratories
Experimental Investigation on a Grid-Connected Photovoltaic Air Conditioning System
Feasibility Study of Distributed Roof Photovoltaic Generation Technology Applications in Shanghai
Operation and Control of a Microgrid Containing PV Cells and Battery
Research on Application of Intelligent Solar System in Stadium
Study of Photovoltaic Energy Storage EMS Based on LabVIEW Data Acquisition
Study on the Control Strategy of PV-Energy Storage Microgrid Working in Islanded Mode
The Performance of a Novel Solar Cooling and Power System with Different Working Fluids
The Research on the Planning of Distributed PV Systems in Connection with Urban Distribution Network
The Research Progress of Solar-Driven Humidification-Dehumidification Desalination Technology
Design of Solar Tracker Based on Square Structure and Camera Device
Experimental Investigation of Using Solar Chimney to Induce Natural Ventilation
Feasibility Study about Solar Energy-Air Source Heat Pump System in Cold Region Rural Residential Applications
Research on Detection Technology of Distributed Grid-Connected Photovoltaic Power Generation
The First Solar Power Tower System in Saudi Arabia
Designing and Realization of a Water Quality Detecting Instrument Based on Solar Power
Design and Application of a Medium/Low-Power Stand-Alone/Grid-Connected Dual-Mode Inverter for Solar Photovoltaic System
Research on Intelligent Control Technology of PV Grid-Connected Inverter
Chapter 2: Development and Utilization of Biomass Energy
Bio-Oil Production from Fast Pyrolysis of Corn Stalk in a Fluidized Bed
Comparison of Capacity for 2,3-Butanediol Production from Corn Cob Hemicelluose Hydrolysate Fermentation by Klebsiellaoxytoca HD79 and Klebsiellapneumoniae
Effects of Hydrothermal Pretreatment on the Content and Structure of Lignin Extracted from Corncob
Effects of Temperature on Mixed-Culture Fermentative Hydrogen Production from Corn Stover Hydrolyzate
Hot Air Ignition Characteristics of Cotton and Corn Straw Pellet Based on TG-DTG
Study on Mechanisms of Liquefied Corn Bran by FT-IR
Study on the Saccharification Conditions of Fuel Ethanol from Corn Straw
Experiment Research on the Purification Technology of Biogas as Engine Fuel
Chapter 3: Development and Utilization of Wind Energy
5MW Offshore Wind Turbine Control Based on Pitch Joint Torque Controller
An Online Rolling Dispatch Optimization Strategy for the Access of Intermittent New Energy
Application of Recurrence Plot to Wind Power Predictability Study under Different Sampling Intervals
Applied Research of Convertible Wind-Solar Hybrid System on Matlab
Comprehensive Evaluation Index on Voltage Fluctuation and Stability Considering Wind Power Generators
Define China's Wind Power Industry Life Cycle Based on the Compartz Curve Model
Design of the Superconducting Excitation Winding for 12 MW Direct-Drive Wind Generator
Dynamic Torsional Load Control of Double-Fed Wind Turbine Drive-Train Based on Three-Mass Shaft Model
Effect of Large-Scale Wind Power Integration on Inter-Area Oscillation of Power System
Energy Management and Coordinated Control Strategies of Isolated Micro-Grid with Wind Turbines and Seawater Desalination Devices
Kemskaya Wind Power Plant in Karelia
Optimal Wind Power Planning Considering Power System Adaptability and Economy
Planetary Gear Train Used in Wind Driver Generator Based on TCA
Study on Application of STATCOM in Dynamic Reactive Power Compensation of Wind Farm Integration
Study on Dispersed Wind Power Connected to Power Grid
Study on Wind Power Heating Mode and Operating Characteristic
Technical and Economic Analysis on Grid-Connected Wind Farm Based on Hybrid Energy Storage System for Active Distribution Network
Technology of Wind Power Forecasting Accuracy Assessment and Curtail Quantity Estimation with Power Capacity Limited
The Development of the Wind Power Industry in Western Jilin
The Research of Wind Power Accommodated Capacity Based on Power Balance
Three-Column Floating Wind-Current Generator and the Analysis of Performance
Wind Data Anomaly Detection and Interpolation of Missing Data
Wind Speed Forecasting in Wind Farm
Wind Power Development in Power Grid and Study on Dispatching Strategy
Dynamic Multi-Objective Power Dispatch Considering Load and Wind Power Variations in Wind Power Integrated System
Dynamical Analysis of Wind Turbine Helical Gear System Based on Flexible Supporting
Economic Comparison of VSC-HVDC and HVAC Systems for Connections of Offshore Wind Farms
Modal Research on the Low-Frequency Oscillation of AC/DC System with DFIG-Based Wind Farms
Multi-Object Optimization Research about Wind/Solar Hybrid Generation System
Containing Small Hydropower and Wind Power System Optimal Spinning Reserve
Impact of Wind Farm Output Fluctuation on Static Stability of Grid
Quantifying the Risk of Wind Power Forecasting Error on Power System Optimal Dispatching
Research of Robust State Estimation Method and Program Implementation Considering Large-Scale Wind Power Integration
Research on the Peaking Gap of Power System with Large-Scale Wind Power Integration
Chapter 4: Nuclear Energy and other Energy
Calculation on the Distribution of Ex-Core Neutron Flux during Reactor Start-Up
Effects of Groundwater Heat Pump Systems on the Temperature and Quality of Groundwater in Recharged Aquifer
Efficiency and Performance Analysis of Tidal Current Energy Turbine Basing on the Unidirectional Fluid-Structure Interaction
Experimental Study of the Temperature Field in Fire Caused by Sodium Leakage in Sodium-Cooled Fast Reactor Loop
Fabrication of Titanium Doped Hollow Glass Microspheres for Inertial Confinement Fusion Targets by Dried Gel Method
Novel Trapezoidal-Loop Piezoelectric Energy Harvester
Optimal Design of the Mooring System for a Floating Hybrid Ocean Renewable Power Generation System
Research on Geothermal Power Generation Technology and its Development Trend
Safety Performance Evaluation of Nuclear Power Station Containment
Status and Trends of Renewable Energy Harvesting
Studies on Geothermal Heating and its Related Issues
Study on a New Array of Oscillating Wave Energy Converter
Study on Operation Strategies of a Hybrid Ground-Source Heat Pump System with Surface Water Heat Exchangers for an Exhibition Building
The Monitoring Data Analysis of the Running Condition in Winter in Line with the Demonstration Project about Soil Source Heat Pump in Severe Cold Regions
Wave Data Analysis for Wave Energy Power in Namae Coast
Environmental Assessments for Wetlands and Estuaries Management near Tidal Power Plant Using of Mass Balance Simulation
Prospect and Suggestions on the Development of Wave Energy Resource in the South China Sea
Research on the Development and Utilization of Geothermal Energy
Optimization Technique for Allocation Scheme and Hydro Power Plant Parameters with Respect to Regional Peculiarities
The Balance of Power System Peak Load Regulation Considering the Participation of Nuclear Power Plant
Chapter 5: Energy-Saving and Energy-Storage Technology
A Newly Energy-Saving Movable Piezoelectric Carpet
A Study on Supply with Consideration on Expectation Level of Energy-Saving Technology and Consumption Pattern of Consumers – Focusing on Boilers
An MILP Formulation for the Thermal Unit Commitment Problem Considering Start-Up and Shut-Down Power Trajectories
Applying Research on Campus Energy-Saving Power Monitoring System
Cost-Benefit Analysis Model of Single and Hybrid Energy Storage System in Active Distribution Network
Damper Optimization Design of High-Speed Energy Storage Flywheel Shafting with a Single Point Flexible Support
Data Center Room Air Conditioning Energy Consumption Analysis
Energy Saving Operation Strategy of an Existed Indoor Ice Rink
Optimal Method of Energy Storage Configuration Considering Operation and Penalty Cost
Preparation of Ternary Composite Phase Change Storage Mortar
Study on Door & Window Energy-Saving Technology at Hot-Summer and Cold-Winter Zone
Study on Energy Saving from Intermittent Operation of Air-Conditioning System
Energy Performance of External versus Internal Shading Devices in Residential Buildings
Energy Saving at Home
Energy-Saving Analysis about Control Strategy of District Heating System
Numerical Simulation of Heat Transfer outside the Tube of the Evaporative Air Cooler
Finite Element Analysis of the Magnetic Field Simulation of High Temperature Superconducting Magnet
Pumping Action of Heat Transfer for Free Convection Flow in a Ventilated Facades
Research of Architecture Based on Distributed Source Plug and Play
Autonomous Energy Efficient Co-Generation Units
Chapter 6: Chemical Engineering, Energy Materials and Fuel Cell
A Three-Dimensional Model for Mass Transfer in Vanadium Redox Flow Battery
Amorphous Alloy Ni-Fe-B: Preparation, Characterization and its Catalytic Ability for Hydrogen Generation
Analysis of Temperature Field in an Oil-Shale Retorting Furnace with Gas Heat Carrier Based on CFD
Contrastive Study on Microwave Pyrolysis Products of Coal under N2 and Non-N2 Atmosphere
Degradation and Performance of SOFC Cathode
Fe-C-N Catalysts Prepared by Magnetron Sputtering for Oxygen Reduction Reaction in a Neutral Solution
Heteropolyanion Substituted Layered Double Hydroxide as Recoverable Catalyst for the Oxidative Desulfurization of Simulated Fuel Oil and Diesel
High-Pressure Design of Composite Vessel for Hydrogen Gas
Hot Water Extraction and Fixed Bed Pyrolysis for Bitumen Recovery of an Indonesian Oil Sand
How to Advance the Hydrogen Production Efficiency by Adding Rare Earths in the Process of Eelectrolysis of Water?
Hydrated Proton Transfer in Nafion117 Membrane
Hydrothermal Synthesis and Electrochemical Performance of LiNi0.5Mn0.5O2 as Lithium-Ion Battery Cathode
Lithium Ion Battery Efficient Thermal Management Numerical Simulation Research
Lithium Ion Battery Temperature Field Numerical Simulation Research
Oxygen Reduction Reaction on Pt Surface in PEM Fuel Cell Cathode Based on the First-Principles Molecular Dynamics
Preparation of Pd-Cu-Ce Hydrogen Separation Membrane Alloys
Pyrolysis of Hailar Lignite: Experiments with a Tubular Reactor and a Continuous Screw Kiln Reactor
Research on the Microwave Pyrolysis of Coal under N2 Atmosphere
Research Progress on Polyoxymethylene Dimethyl Ethers as the Additive Component of Diesel Fuel
Simplified Least Squares - Support Vector Machines for Lead-Acid Batteries SOC Estimation
Study on Synthesis of Alkynoxymethyl Benzyl Quaternary Ammonium Salt and its Corrosion Inhibition for Blast Furnace Gas Pipeline
Study on Synthesis of Polycarboxylate Superplasticizer at Room Temperature
Synthesis of La1-xSrxGa1-yMgy-zMzO3−δ (M=Cr, Mn, Fe, Ni, Co) Electrolyte for IT-SOFCs by Laser Rapid Sintering
Synthesis, Electrical Conductivity and Electrochemical Properties of SrFe1−xSbxO3−δ as Cathode Materials for IT-SOFCs
The Application of High Temperature Foam Surface Active Agent Used in Heavy Oil Thermal Recovery
The Core System Design for New Kilowatt Aluminum-Air Battery
The Effect of Temperature on the Morphology and Electrochemical Performance of Li3V2(Po4)3 Cathode Material
The Structural and Hydrogen Storage Properties of Al-Doped Boron Nitride Nanotube
Update Progress of Pressurized Entrained-Flow Gasifier with Coal Slurry in China
Research on the Effect of Movable Gel Flooding after Polymer Flooding
A Separated-Frequency Parameters Identification Method of Li-Ion Battery Model for Electric Vehicles
Synthesis of Nanosized ANNT Series Ceramic Powder by Citrate Wet Chemical Method
Aqueous Two-Phase System in the Synthesis of Starch Graft Acrylamide Polymer
Swelling and Antibacterial Properties of Chitosan/Poly(vinyl alcohol) Hybrid Hydrogels
Parametric Optimization of Organic Rankine Cycle by Genetic Algorithm
SF6 Byproducts in Simulated Electric Equipment of Overheating Faults in High Humidity
Chapter 7: High Voltage and Insulation Technology
Analysis of the Influence of Electric Field on Current Error of High-Voltage Three-Phase Three-Element Combined Transformer
Analysis of Trip Faults and Protection Measures on 10kV and 20kV Distribution Lines
Effect of Electrical Aging on the Trap Parameter of HVAC XLPE Cable Insulation
Electric Field Analysis Based on FEM and Corona Test of 330 kV Dampers
Research of Influence of Tower Type on Lightning Back-Flashover Performance at High Soil Resistivity Areas
Research on Corrosion Diagnostic Model of Grounding Grid Based on Tellegen's Theorem
Simulation Study of Partial Discharge UHF Wave Transmission Characteristic in GIS Typical Structure
Study on DC Bias Magnetic Properties of Transformer with Different Structures
Study on the Identification of Lightning Over-Voltage Based on ATP-EMTP
Study on Typical Compact Structures and Faults of 220kV Cable-Conductor Bushings
The Design of High-Voltage Cable Partial Discharge On-Line Monitoring System Software
The Dynamic Galloping Characteristics of Icing Guyed HVDC Tower
The Dynamic Influence of HV Controllable Reactor on Net Loss
The Hardware Design of Partial Discharge On-Line Monitoring System in High Voltage Cable
The Influence of Main Components in PM2.5 on Composite Insulator Contamination Flashover Characteristics
The New Development Trend of Distribution Transformer
The Whole Simulation Analysis and Measurement of the Power Frequency Electric Field in 500kV Substation
Effect of Substation Network on Transformer PD Monitoring
Experimental Study on Short-Circuit Withstand Capability of 110kV Power Transformer
Functions and Theoretical Basis of Partial Discharge On-Line Monitoring System for High-Voltage Cables
Experimental Investigation on Breaking Characteristic of Load Switch in Medium High Voltage Ring Network Cabinet
A Power Flow Method for VSC-Multi-Terminal Hybrid System Based on Asynchronous Iteration Algorithm
Analysis and Countermeasures of Value Side Bushing Fault of Converter Transformer in Gezhouba to Nanqiao HVDC Transmission Project
Chapter 8: Electrical Theory and Power Electronics
Cell Analytic Application Based on Dielectrophoresis Microchip
Design and Implementation of LDPC Encoder / Decoder in the Atmospheric Laser Communication
Design and Simulation of Booster's Controller Based on Matlab
Design for the Controller of Desktop 3D Printer
Design of Intelligent Lighting Control System Based on C-Bus
Effect of Traffic Flow on Characteristics of Piezoelectric Harvesting Unit
Study on Loss Calculation for Inverter Based on 1200V SiC MOSFET
Study on Power Supply of the Feeder Terminal Equipment
The Design of Cascade Switching Power Charger Based on PFC
The Research of Communication System of Civil Defense Engineering Based on Siemens PPI Bus
A Numerical Least Squares Analysis of Electromagnetic Compatibility
New Design of Selective Leakage Protective System in Underground LV Distribution Network
Multi-Resonant Compensation Analysis of Contactless Electrial Power Transfer System
Reactor Effects on the AC Governor System Transformer Grid Side Harmonics
Reliability Analysis of Distribution Network with Integrated Photovoltaic Power Generation
The Design and Research of Three-Phase Inverter Dual-Loop Control
Waveform Recognition Technology in Distributed Fault Location of Transmission Line
Control of CSR PWM Outer Current Loop Based on Fuzzy Algorithm
Research on Point Estimate Method and its Application to Calculation of Grounding Current under DC Bias
Design and Analysis of PCB Rogowski Coil Current Transformer
Chapter 9: Power System and Automation
A Classification Management Method of Non-Emergency Reserve under ‘Source-Grid-Load’ Interactive Condition
A Comprehensive Evaluation Method of Primary Frequency Regulation Based on Wide Area Measurement System Data
A Distribution Network Reconfiguration Method Considering Weather Conditions
A Network Topology Corrective Switching Algorithm for Eliminating Line Overloads
Controller Parameters Optimization of PWM Converter Based DFIG
DC Protective Measurement and Control Device for Mass Transit Based on VxWorks
Design and Development of HLA-Based Operation-Maintenance Integration Training Simulation System
Linear State Estimation Based on Measured Quantity Transformation and Calculation of Transmission Losses
Maximum Integration Capacity Analysis of Distributed Generator in Distribution Power System
Operation State Evaluation of Distribution Network Based on Attribute Mathematics
Optimal Power Flow Considering Generator Number Constraint on Regulation of Active Power Output
Optimization of Relay Graph Splicing Based on Repulsion-Tension Algorithm
Previous Research of Real Time Power System Dynamic Monitoring Master Station System Test Specification
Quantitative Analysis of the Fluctuation Reasons of Grid Line Loss Rate
Research on Bus Coupler Charging Protection Problem
Smoothness Prior Approach to Removing Nonlinear Trends from Signals in Identification of Low Frequency Oscillation Mode
Spatial Load Forecasting Based on Load Forecasting Reliability
Study on Power Flow Calculation Using PSASP
Study on System Loss in Distribution Network with DG
Substation Locating Method in Integrated Relay Graph Splicing Based on Improved Genetic Algorithm
The Analysis Method of Potential Loss in Gansu Power Based on DEA
The Improved Five-Zone Control Theory with Considering Dynamic Reactive Power Compensation Device
Numerical Investigation on Transmission Line Conductor Icing
Experimental Analysis and Engineering Design of Laser Removing Technology for Extra Matters on Overhead Lines
Optimal Distributed Generator Allocation in Active Distribution Network Considering Reconfiguration
Divergence Law of Ground Current about DC Transmission System
Study on Coordinated Control of Multi-Distribution Static Var Compensator
Optimal Planning on Reactive Power Compensation of Distribution Network Based on Back/Forward Sweep Method and Tabu Search Algorithm
Interference on Geoelectrical Resistivity Observation from DC Power Transmission Line
Performance Comparison of Typical Built-In UHF Sensors Used for GIS PD Detection
Power Transformer Life Analysis Based on Risk Assessment
The New Methodology of Diagnosis for Transformer Inter-Turn Short Circuit Based on Wavelet Analysis
The On-Line Monitoring of the Winding Deformation of Transformer Based on the Improved Ultrasonic Ranging Method
Chapter 10: New Energy Vehicles and Electric Vehicles
Electric Load Forecasting of Electric Vehicles in Charging
Energy Harvesting Shock Absorbers for Vehicles: Design, Modeling and Simulation
Fast Service Restoration of Multi-Source Active Distribution Network with Microgrids and Electric Vehicles
Research on the Optimum Continuous Mileages under the Pure Electric Mode of Plug-In Hybrid Electric Vehicles
The Optimization Model of Planning Electric Vehicle Charging Station
Chapter 11: Motor and Electric
Analysis of the Sensorless PMSM Control Technique in the Full Speed Section
Analysis of the Stator Current Change on QFQS-200 Synchronous Generator Loss of Field Procession
Design of Drive Circuit for Permanent Magnet Brushless DC Motor
Design of Locomotive Intelligent Watt Hour Meter Based on STM32
Designed Controller of Permanent Magnet Brushless DC Motor Based on DSP
Efficiency Optimization in Speed-Sensorless Control of Induction Motors
Experiment Research on Five-Segment Type Space Vector Pulse Width Modulation for Permanent Magnetic Brushless DC Motor
Lissajous Curve of an Auxiliary Winding Voltage Park Components for Diagnosing Multiple Open Switches Faults in Three Phase Inverter
Simulation of Permanent Magnet Synchronous Motor Field Oriented Vector Control System
The Establishment of Time-Varying Parameter Model of the Synchronous Generator Loss of Field
Three Phase Induction Motor Inverter Defects Diagnosis Using Voltage Spectrum of an Auxiliary Winding
Research on Speed Sensorless Vector Control of Induction Motor
Calculating the Maximum Penetration Capacity of Distributed Generation Considering Current Protection
Chapter 12: Power Grid Technology
Analysis Method of Power Flow in Urban Power Grid with Distribution Generation Based on Dynamic Probability Model
CIM Extensions for the Distributed Energy Resources Integration
Micro-Grid Energy Optimization Base on Installing Heat Storage Tank to Decouple “Heat-Load-Based” Running Constraint of CHP
Modified Suggestions for Distribution Automation Standards to Coping with DG Connected to the Power Grid
Networked Intelligent Perception Technology and its Application in Smart Distribution Grid
Rapid Double-Layer Identification Method of Multi-Relevant Bad Data in Large-Scale Power Grids
Research and Application of Comprehensive Evaluation Index System in Micro-Grid’s Construction and Operation
Research and Application of Integrated Standardization Theory in the Smart Grid Scheduling and Controlling System
Research on AC-DC Power Flow to Solve the Instability of Micro-Grid
Research Status of Key Technologies of Seamless Switching in Micro-Grid
Scenario-Based Stochastic Programming Strategy for Microgrid Energy Scheduling Considering Uncertainties
The Controller Parameters Optimization for Droop Controlled Distributed Generators in Microgrid
Two-Layer Optimize Algorithm for Microgrid Economic Dispatch
Research on Supporting Role of Smart Grid in Wisdom City
Security and Stability Control System Testing Platform for Guangxi Region Power Grid on RTDS
Discussion about the Critical Business Demand of Smart Distribution Grid and Utilization
Micro-Grid Energy Optimization Include Battery-Swapping-Station
The Implementation Pattern of Smart Distribution Grid and Utilization
New Method of Overhead Line Icing Online Monitoring
Close-Operation Overvoltage of No-Load Transmission Line with Fault Current Limiter
Study of the Winding Temperature Distribution for Distribution Transformers
Chapter 13: Power Systems Management
Analysis of the Characteristics and Effects for Sichuan Province Electric Power Consumption
Analysis on Power Grid Investment Base on Cointegration Theory and VAR Model
Intellectualization and Reliability Evaluation of Distribution Network Based on Principal Component Analysis
Medium and Long-Term Load Forecasting Using Grey Theory Based on Rough Sets
Research on Optimization Model of Overseas Investment for Power Grid Enterprise
Short Term Load Forecasting Based on Fuzzy Clustering
Study on Application of Multi-Kernel Relevance Vector Machine in Data Validation of Thermal System in Power Plant
Study on Dynamic Bayesian Game of Power Grid Crisis Management
Study on the Theoretical Basis of Power-Grid Crisis Management
Advanced Progress in Diagnosing the Reliability of Electrical Equipments by Infrared Thermography
Application of Service Flow Technology Based on IEC 61970/61968 to Electric Power Information System
Research on Reliability Evaluation Methods of Distribution System
Chapter 14: Engineering Thermodynamics and Thermal Engineering
Flow Boiling Enhancement by the Surface Quenched in Nanofluid
Numerical Analysis of Distribution of Ion Concentration Affected by Flame Temperature behind a V-Gutter Flameholder
Numerical Simulation for Heat Transfer and Fluid Flow Performances of Thin Film Evaporation in the Micro Rectangular Groove
Numerical Simulation on Effects of Variable Specific Heat Ratio on Floating Ejector Nozzle
Optimization of Parameters of Heat Exchangers of Air Heating Systems
Overview on the Determination Method of Viscosity Parameter of Organic Heat Carrier
Research on Double-Stream Coil-Wound Heat Exchanger
Research on Heat Storage-Release Property of Rectangular Array Tube Encapsulated Heat Storage Device
Research on Operation Optimization of Industrial Boiler by Principal Component Analysis
Simulation Investigation on Structural Parameter of Hot Air Igniter of Biomass
Study on the Basic Characteristics of Low Oxygen Air Combustion with Natural Gas in Glass Tempering Furnace
Test and Research for Mercury Emission of Boilers in 700 MW Units
The Study of Heat Transfer between Adjacent Units on Household Heat Metering
Numerical Simulation Analysis of the Optimized and Transformed 200MW Pulverized Coal Fired Boiler Burner
Chapter 15: Power Machinery and Engineering
Active Predictive Control of Turbine Tip Clearance for Aero-Engine
Analysis of the Movement of the New Wave-Energy Dynamoelectric Equipment
Based on Concept of Generalized Instantaneous Space of Dynamic Performance Analysis
Compressor Performance Curve Extrapolation Method Based on the Similarity Theory
Finite Element Analysis of Large-Size Yaw Bearings with Supporting Structure in Wind Turbine
Harmonic Balance Analysis for the Oscillations of Magnetic Levitation
Multiple Models Fuzzy PID Controller Design in Ship Power System
MV “CRYSTAL STAR” Diesel Turbocharger Surge Cause Analysis and Troubleshooting
Research on Fast Driving Control Technology of Electric-Control Injector for Marine High Pressure Common Rail Diesel
Research on the Measuring and Calculating Methods of the Relative Internal Efficiency for Steam Turbine
Study on the Effects of Oxygenated Fuels on Diesel Engine Performance
Performance Model Development for the Adjustable Blades Axial Flow Fan Based on Multivariate Polynomial Fitting
Application of Siemens T3000 System Self Startup Control for Thermal Power Plant
Research Progress in Natural Frequency Calculation of Heat Exchanger Tube Bundles
Mechanism Analysis of a Boiler Economizer Corrosion
Economic Analysis of Water Source Heat Pump Using Thermal Power Plant Circulating Water Waste Heat
The Tooth Profile Design and Examination of Circular-Arc Gear Pump
Chapter 16: Fluid Machinery and Engineering
Hydraulic Steering Gear Failure Analysis and Troubleshooting for MV “TANSUO HAO”
Hydro Turbine Nonlinear Model Parameter Identification Based on Improved Biogeography-Based Optimization
Simulation and Experiment of Residence Time Distribution in Short-Contact Cyclone Reactors
Study of Coupling Numerical Flow Field Simulation of Low-Pressure Last Stage Exhaust Passage in Steam Turbine
Study of Pressure Characteristics in PWM Controlled Variable Rate Spraying System
Floating Ring Balance Analysis of Journal Floating Ring Hybrid Bearing in Turbulent Regime
Research on Supersonic and Subsonic Field of Externally Pressurized Gas Lubricated Bearing
The Mixed Modeling of the Steam Turbine Flow Characteristics Based on Improved Particle Swarm Optimization Level
Numerical Optimization for Bottom Structure of ZGM Medium Speed Mill
Chapter 17: HVAC, Air Conditioning and Refrigeration
Analysis on Thermal Comfort of Air-Conditioned Buildings in Malaysia: Case Study of Universiti Tenaga Nasional
Dynamic Behavior of Air Condition System and Temperature Control Analysis
Entropy Analysis of a R32/CO2 Cascade Refrigeration Cycle
Experimental Research on Small-Scale Variable Flow Refrigeration System for Data Cabinets
Experimental Study on Throttling Refrigeration System Using Mixed Refrigerants
Research Based on the Actual Project of Central Air Conditioning Intelligent Frequency Conversion System
Simulation Analysis on Dynamic Load of Air-Conditioning System of Ocean-Going Ship
Simulation Study on Ventilation & Cooling for an Indoor Substation
Study on Performances of Refrigeration-Type Compressed-Air Dryers Using Environmentally-Friendly Refrigerants R717, R290 and R600a
The Application of Genetic Algorithm on the Regulation of Central Heating System
The Load’s Control of Central Air Conditioning System Based on Comfort
The Research of Constant Temperature and Humidity Air-Conditioning System of Underground Cellar
Baseline Load Models of Air-Conditioning in Commercial Buildings Considering Temperature and Seasons
Experimental Study on a New Type of Shipping Container Refrigeration Unit
Research on the Application of Alternative Refrigerants R407C and R410A in Refrigeration-Type Compressed-Air Dryers
The Development of Device for On-Line Monitoring Circulating Cooling Water Stability
CFD Simulation of Capillary Network Radiation Heating Comfort
A Study of Cooling Load Calculation of Stratified Air Conditioning System for Large Space Based on the Simultaneously Solving Model
Chapter 18: Mechatronics and Automation
Design and Simulation to Composite MPPT Controller on the Stratospheric Airship
Impedance Control Based Sliding Mode for Lower Limb Rehabilitation Robot
Optical Microscope Automatic Focusing Methods Research
The Design of Depth Drill Machine Based on Automatic Control AC Servo System
Research Progress in Electro-Hydraulic Position Servo Controller
Intelligent Control of Heating Systems in Public Building
Chapter 19: Green Building Materials, Energy-Efficient Buildings and Construction Technology
The Ecological Characteristics of Chinese Traditional Architecture
Analysis of Equilibrium and Carrying Capability of the Octahedral Truss Structure
Analysis of the Settlement in Rigid Pile Composite Foundation
Applied Research on Energy-Saving Technology of Buildings in Hot Summer and Cold Winter Regions of China
Building Electrical Design and Energy-Saving Measures
Combined Support Technology with Bolt, Steel Mesh and Anchor Applied in Baoxin Coal Mine
Experimental Investigations on Alkali-Activated Slag Cementitious Material
Investigation Progress of Phase Change Building Materials
Review of Crumb Rubber Concrete
Road Performance of Silane Coupling Agent Modified Rubber Concrete
The Relationship between Architectural Materials and Human Settlements
The Study on Promotion of Chinese Green Energy-Saving Buildings
Crack Resistance Design for the Circular Hydraulic Tunnel Lining Structures
Heating and Cooling Load Characteristics Comparison between Normal Building and Low Energy Consumption Building
Key Technologies and Trends of Passive Buildings
Relaxation Laws of Anchor on Pressure Dispersive Retaining Wall
CCHP System Operating Strategy Optimization Research in one of Shanghai Office Building
Research on Improved CCHP System Based on Comprehensive Performance Evaluation Criterion
Research on the Pass Optimization Design of Sintered Shale Porous Brick
Experimental Study on Additives for the Reduction of Alkalinity for Ecological Concrete
Study on the Dynamic Response of Prestressed Concrete Beam under Explosive Load
Three-Point Flexural Normal Stress Analysis of Wood-Bamboo Sandwich Composite
Research on Technology for Producing Green and Environmental - Friendly Silicate Glass
Numerical Modeling of Thermogravitational Convection in Air Gap of System of Rear Ventilated Facades
Chapter 20: Computational Mathematics and Modeling, Data Processing, Communication and Information Technologies
A Wavelet-Based Method for Automatic Location of Peaks in Gamma-Ray Spectra
An Efficient Coverage Hole Patching Algorithm Based on Intersection Knowledge
An Improved Method of Firewall Policy Anomaly Detection Based on Decision Tree
An Improved Trace Method for Moving Target under Occlusion
Decomposing Complete 3-Uniform Hypergraph into 5-Cycles
Gait Analysis and Trajectory Planning for Lower Limb Rehabilitation Training
Modeling and Evaluation in an Interworking of WLAN and WiMAX Network
Modeling of Content-Aware Based on Multi-Sources Heterogeneous Data Sensed in the Internet of Things
Multi-Focus Image Fusion Based on Pyramid Decomposition
Project Design on the Monitoring and Early-Warning of Pork Market in Beijing Based on Multi-Source Data Integration
Radon Transform Removes Correlation Noise Produced by Vibroseis
Reduction-by-Projection Method for Linear Programming Problems
Study on Defogging Effect Evaluation Method in Atomization Image
Study on Performance Comparison of OLSR and AODV Routing Protocols
The Design and Implementation of Android-Based Mobile Learning Platform
The Design of Library Management System Based on Internet of Things and Hand Lines Recognition System
Abstracting Clinical Pathway Sequence with Genetic Algorithm
Based on the Human Eye Fatigue Detection System of Recognition and FPGA Technology
Method of Fuzzy Modeling in Reliability Prediction Algorithm
Research and Application of Information Hiding Algorithm
Research on Caching Mechanism Based on User Community
Research on Integrals of the Second Category Curved Surface
Wireless Thermal Printer Based on Internet of Things
Application of Improved LMS Adaptive Algorithm in Acoustics Pyrometry
Application of Wavelet Analysis in Random Drift Signal Filtering of Fiber Optic Gyroscope
MCL and ACO Based QoS Routing Algorithm for WSN Used in Power Line Monitoring
The Interference Impact of UWB Sensor on Mobile Station of 3G Mobile System
Application and Research of Systematic Cluster in IED Switch Online Condition Monitoring
Star Simulator Base on Multiple LEDs, Optical Fiber and Integral Sphere
The Communication Research between PLC and PID Temperature Controller
Chapter 21: Demand, Supply, Development, Management of Energies and Resources
A Theoretical Framework on the Resource Industry: From the Value of Resource in Economy
Adjust Energy Structure, Promoting Chinese Environmental Protection
Assessment and Optimization of the Low Carbon Benefits of the Technical Transformation Projects for Loss Reduction in Power Networks
Construction of the Factors Affecting China's Hydropower Projects and Overseas Investment Risk Assessment Index System
Energy Consumption Forecasting in Hong Kong Using ARIMA and Artificial Neural Networks Models
Investment Decisions Based on the Postponed Options PROT Hydropower Project
On the Influencing Factors and the Continuous-Improving Mechanism of China’s Energy Efficiency
Research on the Utilization of Renewable Energy in Tianjin
Structural Decomposition of China’s Energy Use during 2000-2011 with World Input Output Table (WIOT) Data
Study on the Model of the Stability of International Energy Cooperative
Study on the Opportunities and Challenges of Chinese Energy Investment in the Middle East
The Characteristics of China's Hydropower Projects Overseas Investment Risk and Possible Countermeasures
The Research of Multiple Attribute Group Decision-Making Method Based on Cloud-PROMETHEE
The Research on Index System of Economic Society Development Based on the Medium and Long-Term Power Demand Forecasting
The Strategic Choice of Hexi New Energy Base under the Framework of the Silk Road Economic Belt: Based on the SWOT Analysis
Total-Factor Energy Efficiency and Influence Factors Analysis in Regions of China
A Survey on Ownership of Home Appliances and Electric Energy Consumption Status According to the Number of Household Member
Impacts of Electricity Price Reform on Energy and Residents’ Life in China
Research on the Evolution of the Complex Network Theory Based on the International Coal Trade
Renewable Energy Promotion Policy for Elementary, Middle, and High Schools in Seoul
Chapter 22: Industrial Engineering and Project Management
Device Risk Ranking Research Based on the Potential Life Loss
New Fuzzy Classified Model for Disaster Loss
Public Facilities Design in Sustainable Ways for Reconstruction Work of Yushu Area
Research on Choice of Logistics Mode of B2C Enterprises with FAHP
Investment Control of Construction Project
Accounting “Pure” Risks in Early Stage of Investment in Construction Projects with Energy Efficient Technologies in Use
The Way of Allocating Short-Supplied Talents in Multi-Project Based on Queuing Theory
Introduction of Complex Automation of Engineering Infrastructure for the Solution of Operational Problems in Public Sports Pools
Chapter 23: Engineering Education
Application of Research-Oriented Experimental Teaching in Biopharmaceutical Courses
College Students' Innovative Thinking Ability Training Process and the Observation Result
Research of Distance Education Based on Virtual Reality Technology in Power System
Study on the Environmental Education of Hydraulic Engineering
Study on the Mode of Talent Cultivating for Electrical Engineering and Automation Profession under the New Situation
Application of IOT in Physical Teaching of Ethnic Colleges
Research on the Application of IT in Electrical Automation Technology Major Course Teaching
Good Teaching Spirit Connotation and Countermeasure Analysis
The Impact of Information Technology on the Performance Evaluation System of Scientific Research in Universities